- You cannot add "LedWave XP-1 Trooper Max" to the cart because the product is out of stock.
Esteira Insuflável Multimat – Nato Mattress 35 S
€39,00
Range | Expedition |
Type | Self-inflating |
Code | CMSI-MI5035S |
Size | 1220x520x35mm (S) |
Weight | 725g |
Season Rating | 5 |
Tog Value | 5.3* |
Compactness | 280x160mm |
Colour | MoD |
Features |
|
1 in stock
Description
If you’re going on an unsupported expedition you need high-quality lightweight kit you can rely on, as your life could be put at risk if it fails.
Multimat’s NATO Mattress 35 S is designed to meet these needs like no other mat. Born specifically for the British Armed Forces, it is the current standard equipment for operational use in all arenas. Meeting NSN 8465-99-310-9203 requirements, it is a light, self-inflating 35mm thick mattress, made to be durable and reliable in the most extreme conditions our planet can throw at it.
The tough 75D polyester “rip-stop” water-repellent upper fabric with a 150D waterproof coated base fabric gives it essential durability, with non slip to both surfaces for your convenience. The vertically drilled top-quality foam core ensures it continues to fully inflate through the removable & serviceable large valve, time after time.
It even features an anti-bacterial ether TPU membrane for an air-tight seal that’s been specially formulated to work at lower temperatures.
If you’re looking for an extra-light self-inflating expedition mat for polar or high altitude expeditions, check out the military issue NATO mattress 35 S.
Additional information
Weight | 750 g |
---|---|
Dimensions | 28 × 16 × 16 cm |
Related products
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
A Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Tan FDE
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Tan FDE
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Add to cart
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
€12,95Add to cart
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart