Princeton Tec CHARGE PRO MPLS TAN
€179,00
WARRANTY 1 Year
2 in stock
Description
The Charge Pro was designed to mount to various helmet rail systems, but has become more versatile including a wide variety of mounts that allow you to use the light on all of your gear. The Charge Pro runs off of a single CR123 Lithium battery, keeping it lightweight, extending burn time and standing up to colder climates.
The Charge Pro offers a clean white flood light for distance spotting or large area lighting and a lower lumen light output for close at hand administrative tasks when in the field. The white flood light is fueled by a Maxbright LED, while the lower lumen administrative lighting comes from 3 Ultrabright LEDs, which are available in a number of specialty color configurations. (Read more about our specialty LED color options here.) Choose your LED configuration in the drop down menu above.
Ease of performance in exacting situations was kept top-of-mind while designing the user interface, so the Charge Pro’s Maxbright white mode requires a full two-second button press to be turned on to avoid accidental activation.
Versatile, smart and tough, the Charge Pro (along with our other MPLS Helmet Lights) were created with our exclusive flexi-neck design allowing you to direct light where you need it, regardless of the angle of your helmet.
All Princeton Tec MPLS Helmet Lights come with the following mounts:
- Standard Nylon Headstrap
- Helmet Side Mount
- ARCs
- EXFIL Rail
- MOLLE/PALS
- Picatinny
- Above the Rail
Additional information
Weight | 300 g |
---|---|
Dimensions | 25 × 15 × 7 cm |
Related products
Magpul 5.56 3 Pack FDE
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
Magpul 5.56 3 Pack FDE
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
€14,90Read more
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart
Princeton Tec SWITCH
SPECIFICATIONS
POWER | 10 Lumens |
BATTERIES | (2) 2016 Lithium Coin Cell |
WEIGHT | 17 Grams |
Princeton Tec SWITCH
SPECIFICATIONS
POWER | 10 Lumens |
BATTERIES | (2) 2016 Lithium Coin Cell |
WEIGHT | 17 Grams |
€60,50Read more
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Add to cart
LedWave XP-1 Trooper Max
The universal tactical light with: antiroll system, 100% tail cap tactical switch, module with shock-insolation system
Colour flashlight: Black (anti-slide rubber layer)
Battery type: 2xCR123A
Functions intensity: High
Led colour: White
LedWave XP-1 Trooper Max
The universal tactical light with: antiroll system, 100% tail cap tactical switch, module with shock-insolation system
Colour flashlight: Black (anti-slide rubber layer)
Battery type: 2xCR123A
Functions intensity: High
Led colour: White
€69,90 €57,50Read more
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
€35,90Read more
Magpul 5.56 3 Pack OD
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
Magpul 5.56 3 Pack OD
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
€14,90Read more
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Tan FDE
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Tan FDE
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart