Warrior Duty Belt Black Small/Medium
€20,00
Warrior’s fully adjustable Duty Belt incorporates a dual action release system. Made from high quality materials.
Out of stock
Description
Thread quality is fundamental to the construction, durability and strength of tactical equipment.
Two factors have a negative impact on the life Span of threads
1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.
2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.
Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew.
Infra-Red Properties
All our Clips, Fabrics, Plastic Hardware, Threads and MultiCam/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible.
Related products
Warrior Duty Belt Black Lg – XL
Warrior’s fully adjustable Duty Belt incorporates a dual action release system. Made from high quality materials.
Warrior Duty Belt Black Lg – XL
Warrior’s fully adjustable Duty Belt incorporates a dual action release system. Made from high quality materials.
€20,00Add to cart
Warrior Fight Light Belt – Size M Multicam
Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters.
The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing arms, allowing pouches to be threaded through it, this layer is backed by a 45mm belt made from ultra strong riggers webbing and finished off with a 25mm metal Cobra Buckle.
Fully adjustable and available in Small, Medium, Large and XL.
Small = 30 to 33 inches
Medium = 33 to 36 inches
Large = 36 to 39 inches
XL = 39 to 42 inches
Warrior Fight Light Belt – Size M Multicam
Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters.
The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing arms, allowing pouches to be threaded through it, this layer is backed by a 45mm belt made from ultra strong riggers webbing and finished off with a 25mm metal Cobra Buckle.
Fully adjustable and available in Small, Medium, Large and XL.
Small = 30 to 33 inches
Medium = 33 to 36 inches
Large = 36 to 39 inches
XL = 39 to 42 inches
€59,95Read more
Shooters Factory Direct Action Molle Belt Olive
Direct Action tactical combat belt from Shooters Factory – an excellent choice for shooters. Available in various colors and sizes. Provides comfort and functionality at work and on the shooting range.
Sizing: when ordering, please provide waist circumference in centimeters.
Width of the main belt: 5 cm
inner belt width 4.4cm
Direct Action Tactical Combat Belt – Perfect for shooters
The two-piece Direct Action tactical belt from Shooters Factory is a reliable solution for shooters looking for the highest quality. Our belt is the perfect choice!
Reliable Design
This belt was designed and tested during army exercises and missions in conflict zones by a special forces soldier, which guarantees its durability and functionality. It is made of the best materials available on the market, which means you can rely on it during every shooting training.
Color and Pattern
Available in various colors and camouflage patterns, allowing you to adapt it to your style.
Exceptional Comfort
The two-layer construction of this belt improves the comfort of use. Soft material on the edges ensures comfort of wearing, and the layer with attached accessories is easily connected to the inner layer using Velcro.
MOLLE system : The outer layer of the belt has straps enabling the connection of various accessories with the MOLLE system, which allows the belt to be adjusted to the individual needs of the shooter.
Cobra buckle at your request
The Cobra buckle can be standard or with a “D” ring (matt black or silver) – the choice is yours. This is an additional personalization option that will adapt the belt to your needs.
Size Right For You
When ordering this belt, it is important to provide the future user’s waist size in centimeters. Take the measurement at the height where you usually wear the belt and enter the nominal result in centimeters. Thanks to this, the belt will fit perfectly.
Warning
Shooters Factory belts, although equipped with a “D” or other type of buckle, are not designed for use as rappelling or hauling harnesses. The design of the belt is intended to secure users on flying or other platforms. Shooters Factory accepts no liability relating to misuse of this product, damages or costs resulting from misuse of our product.
Shooters Factory Direct Action Molle Belt Olive
Direct Action tactical combat belt from Shooters Factory – an excellent choice for shooters. Available in various colors and sizes. Provides comfort and functionality at work and on the shooting range.
Sizing: when ordering, please provide waist circumference in centimeters.
Width of the main belt: 5 cm
inner belt width 4.4cm
Direct Action Tactical Combat Belt – Perfect for shooters
The two-piece Direct Action tactical belt from Shooters Factory is a reliable solution for shooters looking for the highest quality. Our belt is the perfect choice!
Reliable Design
This belt was designed and tested during army exercises and missions in conflict zones by a special forces soldier, which guarantees its durability and functionality. It is made of the best materials available on the market, which means you can rely on it during every shooting training.
Color and Pattern
Available in various colors and camouflage patterns, allowing you to adapt it to your style.
Exceptional Comfort
The two-layer construction of this belt improves the comfort of use. Soft material on the edges ensures comfort of wearing, and the layer with attached accessories is easily connected to the inner layer using Velcro.
MOLLE system : The outer layer of the belt has straps enabling the connection of various accessories with the MOLLE system, which allows the belt to be adjusted to the individual needs of the shooter.
Cobra buckle at your request
The Cobra buckle can be standard or with a “D” ring (matt black or silver) – the choice is yours. This is an additional personalization option that will adapt the belt to your needs.
Size Right For You
When ordering this belt, it is important to provide the future user’s waist size in centimeters. Take the measurement at the height where you usually wear the belt and enter the nominal result in centimeters. Thanks to this, the belt will fit perfectly.
Warning
Shooters Factory belts, although equipped with a “D” or other type of buckle, are not designed for use as rappelling or hauling harnesses. The design of the belt is intended to secure users on flying or other platforms. Shooters Factory accepts no liability relating to misuse of this product, damages or costs resulting from misuse of our product.
€105,00Select options
Direct Action Mustang Inner Belt Coyote Brown
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
Direct Action Mustang Inner Belt Coyote Brown
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
€27,90Select options
Warrior Low Profile Molle Belt Coyote Tan
Warrior’s Low Profile MOLLE Belt (LPMB) offers a 2 stage low profile platform capable of carrying a wide variety of mission specific pouches and holsters including Drop Leg rigs. Part one is a reinforced slimline belt that is covered in loop Velcro and is designed to be threaded through the operator’s belt loops and acts in the same way that a traditional belt would. The second part of the system is made up of a low profile MOLLE belt covered in 2 rows of Mil Spec webbing, this belt has a row of hook Velcro on the inside which marries up to first belt, it is then secured by way of a removable belt and composite GT Cobra buckle. This belt can be removed at any time and substituted for a Riggers style belt if required. The LPMB allows a very stable draw when using belt mounted holsters as there is no movement due to the Velcro bond between both belts.
Warrior Low Profile Molle Belt Coyote Tan
Warrior’s Low Profile MOLLE Belt (LPMB) offers a 2 stage low profile platform capable of carrying a wide variety of mission specific pouches and holsters including Drop Leg rigs. Part one is a reinforced slimline belt that is covered in loop Velcro and is designed to be threaded through the operator’s belt loops and acts in the same way that a traditional belt would. The second part of the system is made up of a low profile MOLLE belt covered in 2 rows of Mil Spec webbing, this belt has a row of hook Velcro on the inside which marries up to first belt, it is then secured by way of a removable belt and composite GT Cobra buckle. This belt can be removed at any time and substituted for a Riggers style belt if required. The LPMB allows a very stable draw when using belt mounted holsters as there is no movement due to the Velcro bond between both belts.
€80,00Select options
WARRIOR PLB BELT Multicam
Featuring 500D Cordura Crye MultiCam I.R. Fabric Genuine MultiCam US Mil Spec webbing ( with a breaking strength of 1000 Lbs ) US Mil Spec Thread treated against Mildew and
WARRIOR PLB BELT Multicam
Featuring 500D Cordura Crye MultiCam I.R. Fabric Genuine MultiCam US Mil Spec webbing ( with a breaking strength of 1000 Lbs ) US Mil Spec Thread treated against Mildew and
€65,00Read more
Warrior Elite OPS FRAG BELT – Multicam
The Warrior Frag Belt is a large high backed version of our PLB Belt, with the added ability to accept a Level
Warrior Elite OPS FRAG BELT – Multicam
The Warrior Frag Belt is a large high backed version of our PLB Belt, with the added ability to accept a Level
€69,00Read more
Helikon Tex MID-Pro Belt Black
Mid-Pro Belt® is an EDC belt that can be used without getting unnecessary attention. The belt is designed to carry items such as pistol magazines, handheld flashlights, batons or other equipment with similar size and shape. The belt has one horizontal, internal zippered pocket for carrying at, soft items. On the external layer the belt has two panels made of elastic webbing to organize the whole carried equipment. The belt is closed with AustriAlpin® Belt buckle. Features: -Internal hidden zippered pocket -Two elastic webbing panels for various equipment -AustriAlpin® belt buckle -Additional equipment shown on photos are not part of the belt lub Additional equipment shown on photos are not sold with the belt
Helikon Tex MID-Pro Belt Black
Mid-Pro Belt® is an EDC belt that can be used without getting unnecessary attention. The belt is designed to carry items such as pistol magazines, handheld flashlights, batons or other equipment with similar size and shape. The belt has one horizontal, internal zippered pocket for carrying at, soft items. On the external layer the belt has two panels made of elastic webbing to organize the whole carried equipment. The belt is closed with AustriAlpin® Belt buckle. Features: -Internal hidden zippered pocket -Two elastic webbing panels for various equipment -AustriAlpin® belt buckle -Additional equipment shown on photos are not part of the belt lub Additional equipment shown on photos are not sold with the belt
€39,90Select options
2 YEARS WARRANTY
ONLINE SUPPORT