Blue Force Gear Uloop 1 Inch Black
€19,90
Sling hooks and clips are on borrowed time! The world no longer has to tolerate loud, jangly sling attachments, hooks that eat up aluminum and plastic eyelets, or hardware pieces that take too long to attach and remove. With the Patent Pending ULoop finally on the scene, the hook and clip extinction event has begun.
The ULoop™ brings a level of versatility that is unmatched by any other sling hardware. Code named the “Uber Loop” it is a quick-detach version of our popular Universal Wire Loop, offering even faster and easier installation, especially on smaller eyelets found on HK, SIG and FN weapons. The ULoop can be installed almost anywhere – through eyelets, holes in railed handguards, and on KeyMod rails. There’s no need to have multiple sling attachments. The ULoop replaces all hooks, clips and connections.
The ULoop can be installed in seconds and does not need to be removed from the sling. To release the wire, push the wire loop down towards the body. Then push the exposed crimp ball from the opposite side out of the locking channel (Figure 2). Pull the loose end of the cable out of the body (Figure 3). From there, the wire can be inserted through eyelets, loops on weapons, holes or slots in rails / KeyMod (Figure 4). Simply push the loose end of the cable back into the ULoop body and snap the cable back into the locking channel (Figure 5).
Out of stock
Additional information
Weight | 14 g |
---|---|
Dimensions | 5 × 5 × 1 cm |
Related products
Princeton Tec SWITCH
SPECIFICATIONS
POWER | 10 Lumens |
BATTERIES | (2) 2016 Lithium Coin Cell |
WEIGHT | 17 Grams |
Princeton Tec SWITCH
SPECIFICATIONS
POWER | 10 Lumens |
BATTERIES | (2) 2016 Lithium Coin Cell |
WEIGHT | 17 Grams |
€60,50Read more
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
Manta Defense M27IAR Kit Black
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit Black
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Add to cart
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
€8,90Add to cart
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
€35,90Read more
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
Magpul® DAKA® Pouch, Small Flat Dark Earth
The Magpul DAKA Pouch was designed to bring organization to the dusty, dirty, and muddy world we work and play in. The
Magpul® DAKA® Pouch, Small Flat Dark Earth
The Magpul DAKA Pouch was designed to bring organization to the dusty, dirty, and muddy world we work and play in. The
€21,00Add to cart