Clawgear Merino Low Cut/Ankle Socks Green
Clawgear Low Cut Sock
Developed in conjunction with
European special forces, the socks
from our Merino series meet the
highest performance standards for
professional users. The socks are a
blend of 50% Merino wool, 48%
Polyamide and 2% Elastane.
The hard wearing and shock
absorbing terry sole provides all
day comfort while the mesh
construction provides a pleasant
foot climate.
CLAWGEAR Multi Purpose ID Holder Multicam
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.
The Multi-Purpose ID Holder is an ID card sleeve which can be attached to any Velcro surface or to an included neck-strap adapter.
Features:
– Designed for ID cards
– Made of bonded Laminate for extreme robustness
– Adjustable neck strap
– Detachable ID card compartment with HOOK fastener
– Two flat card slots on the rear of the holder
Fabrics:
– 500D Nylon bonded with NBR fabric
– Woojin plastic parts
Dimensions:
Height: 13cm
Width: 8,5cm
ID card pocket window size:
Height: 9cm
Width: 6,5cm
Weight: 80 g
Shipping weight: 60
Clawgear Merino Crew Socks Green
Developed in conjunction with European special forces, the socks from our Merino series, meet the highest performance standards for professional users. The socks are a blend of 49% Merino wool, 48% polyamid and 3% elastane. The hard wearing, shock absorbing, terry sole provides all day comfort while the mesh construction provides a pleasant foot climate.
Weight: 50 g
Shipping weight: 80 g
CLAWGEAR MK.II STORM POCKET LIGHTER RAL 7013
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
CLAWGEAR MK.II STORM POCKET LIGHTER Coyote
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
CLAWGEAR RUBBER BANDS STANDARD 12PCS
Our most versatile piece of equipment, a must have accessory for every basic configuration. Attaching a cable switch on your front grip, fixing your light-sticks on your plate carrier, holding your tourniquet on the shoulder straps of your vest and many more.
Mil Spec, made from highest grade natural rubber. Made in USA
Dimensions: 2 x 3/8 x .062 inches each
CLAWGEAR 6 Inch Light Stick Yellow Blue
The 6″ lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
CLAWGEAR 6 Inch Light Stick Yellow Green
The 6″ lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
CLAWGEAR 6 Inch Light Stick Yellow Red
The 6″ lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
CLAWGEAR 6 Inch Light Stick Yellow
The 6″ lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
ESP Swiveling holder for expandable baton BHU-14
ESP Swiveling holder for expandable baton BHU-04
Victorinox Nail Clipper
Under Armour Heatgear Crew Meias (3 pares)
As meias Under Armour HeatGear oferecem o máximo conforto e ajudam a melhorar o fluxo sanguíneo para que nada detenha a sua atividade.
– Tecido HeatGear que absorve o suor da pele para manter a frescura, a secura e a leveza
– Suporte dinâmico no arco para reduzir a fadiga do pé
– Amortecimento estratégico para reduzir o volume e proporcionar flexibilidade e respirabilidade
– Painéis de malha para maior respirabilidade
– A embalagem inclui três pares de meia
Weight: 220 g
Shipping weight: 220 g
Magpul M-LOK AFG Angled Fore-Grip FDE
The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction, we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.
Allowing for a wider range of mounting location options, the M-LOK AFG is ¾” shorter than the AFG-2, while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors, it takes into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter’s hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
Made in the USA.
Weight: 36 g
Shipping weight: 70 g
2 YEARS WARRANTY
ONLINE SUPPORT