CLAWGEAR 6 Inch Light Stick Yellow Red
€1,99
The 6″ lightstick is a portable and cost-efficient source of light. Each lightstick is a pliable plastic tube filled with two non-toxic chemical solutions, one held separate in a floating ampule to prevent activation until required. To activate, simply bend the tube and shake. This breaks the ampule and mixes the chemicals. A bright light is released via chemi-luminescense, a chemical reaction converting energy to light without heat, flame, or sparks. No batteries or bulbs are required. These lightsticks are suitable for a wide range of applications in combat, training and outdoor activity.
25 in stock
Related products
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Add to cart
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
€8,90Add to cart
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
€37,95Add to cart
Clawgear Merino Crew Socks Green
Developed in conjunction with European special forces, the socks from our Merino series, meet the highest performance standards for professional users. The socks are a blend of 49% Merino wool, 48% polyamid and 3% elastane. The hard wearing, shock absorbing, terry sole provides all day comfort while the mesh construction provides a pleasant foot climate.
Weight: 50 g
Shipping weight: 80 g
Clawgear Merino Crew Socks Green
Developed in conjunction with European special forces, the socks from our Merino series, meet the highest performance standards for professional users. The socks are a blend of 49% Merino wool, 48% polyamid and 3% elastane. The hard wearing, shock absorbing, terry sole provides all day comfort while the mesh construction provides a pleasant foot climate.
Weight: 50 g
Shipping weight: 80 g
€19,90Select options
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense M-Lok Rail Guards Tan FDE
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Tan FDE
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
A Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT
Reviews
There are no reviews yet.