Helikon Tex Urban Tactical Belt Coyote
Urban Tactical Belt® is a simple and functional belt. Lightweight, non-metallic construction makes it a perfect solution for both Military and LE
Clawgear Level 1 – L Belt RAL7013
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible.
Helikon Tex Competition Nautic Shooting Belt Black
Competition Nautic Shooting Belt is one of our basic, 45 mm wide range belts. With a partially stiffened construction it allows a stable carry of a holster with a pistol, as well as ammo pouches, med kits, and accessory items. Loop lining allows combination of the belt with an additional inner belt for stability during use. The belt is fastened with a genuine Cobra® Nautic buckle; the buckle is not only resistant to salt, dust, and debris, but is also much flatter than other Cobra® buckles, making it much more comfortable, even during prolonged use. What’s more, the Nautic belt is a perfect choice for any modular belt sleeve.
Features:
45mm wide nylon webbing
Lined with Velcro® loop,
Helikon Tex Competition Modular Belt Sleeve Black
COMPETITION Modular Belt Sleeve® is one of the two platforms of the COMPETITION Set. It was designed as an additional sleeve for the main 45 mm wide COMPETITION Nautic Shooting Belt, but will also work with any other gun belts up to 45 mm wide. The sleeve is fully padded with thick, durable EVA® foam, so that you won’t feel any discomfort from gun belt of sharp edges of the pouches. On the surface there are laser cut modular platforms compatible with MOLLE/PALS system. The platforms are divided into section so that you are able to weave your belt outside for mounting holster or belt mountable pouches. On the sides there are two horizontal slits on the bottom for mounting hip holsters or drop leg panels. The sleeve is profiled and lined with mesh for comfort even during prolonged use. Four low profile paracord loops will allow mounting of any harness.
Features:
Lined with mesh
Made of Cordura®
Laser cut PALS/MOLLE on front and sides
Harness anchor points
Padded with EVA® foam
Vertical slits between modular panels
Clawgear Level 1 – L Belt Black
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible.
Clawgear Level 1 – L Belt Coyote
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible.
NFM GENTO Duty Belt
NFM GENTO Duty Belt
Traditionally, officers have been forced to choose between comfort and the support of their equipment. The GENTO Duty Belt solves this problem by providing a secure and well-fitting solution for everyday use. Not only does it provide a tactical advantage by keeping the attached equipment stable in active situations, but the easily adjustable and ergonomic design is equally comfortable for seated and stationary duties.
MAINTAINS RIGIDITY WHILE ACCOMPANYING STANDARD EQUIPMENT
Most of today’s tactical belts are made of several layers of nylon, and some with plastic inlays, both of which provide some rigidity. This does not, however, apply to the area where it is folded around the belt buckle, which would make it bulky. The GENTO Duty Belt utilizes a molded design where no folding is required, thus providing superior rigidity in this area, too. The rigidity of the belt makes it possible to wear the belt more loosely than traditional belts, improving the comfort.
All standard 50mm equipment will fit on the belt. Half-through holes can be used for quick attachment systems, while the padding provides sideways locking of equipment using hook & loop.
The product designers at NFM know how tough a job law enforcement can be, and the toll it can take on the body. It is our mission to provide the highest levels of comfort and protection while maximising performance. In other words, our mission is to protect those that protect us.
Human anatomy causes the abdomen to move down and forward into the pelvis when moving from a standing to a seated position. This causes the diameter of the waist to increase. A belt that is properly tightened when the wearer is standing may be too tight when seated. This situation is only resolved in the following ways:
- The wearer reluctantly accepts the additional belt pressure on the abdomen restricting blood flow by pressing on the veins,causing discomfort.
- The belt is made from a flexible material that will “give” or is left intentionally loose, creating instability of equipment when the wearer is standing or active.
- The belt adjusts to the change in waist diameter.
HOW IT WORKS
The GENTO Duty Belt uses a patented design to make belt adjustment quick and easy so that it can be set at the optimal diameter whether the wearer is standing or seated. This provides the foundation for greater comfort and better equipment support than ever before.
ERGONOMIC, COMFORTABLE & BREATHABLE
The easiest way to make a belt is to keep it flat. However, on the GENTO Duty Belt the sidepiece is molded with a 6 degree angle towards the back to allow it to follow the natural curvature of the spine and rest comfortably on the area between the lumbar and the buttock muscles. There is also a 4 degree twist in the sidepieces creating a conical shape, which further enhances the lumbar support.
There is comfortable padding all around, designed ergonomically, with a breathable outer mesh increasing the ventilation. Extra conical- shaped padding has been added to the back plate to give support and distribute pressure throughout the affected parts of the body. These features, along with the even weight distribution of equipment provided by the adjustable fit, reduce and may even eliminate long-term back problems encountered by those routinely carrying heavy loads.
On most existing solutions, the user must take the belt off, open a Velcro® flap, and then open the buckle to adjust the belt. In addition, the position of the gear mounted on the belt might have to be moved after the adjustment. With the GENTO Duty Belt, adjustments are easily made by pressing the release buttons on the back plate and then altering the fit. By making the adjustment on both sides at the back, symmetrical adjustment can be achieved, keeping the critical equipment mounted in front of the belt in the optimal position.
The adjustment mechanism contains an end-stop, which ensures that the belt cannot split or be removed accidentally.
The ease of adjustment is particularly relevant simply when there is a need for release around your waist.
Barbaric Cinturão
Barbaric Cinturão
Tipo: Cinturão
Material: nylon rígido
Tamanhos: S/M 100×5 cm L/XL 120×5
Cor: preto
Fecho de segurança tripla
Fivela: PVC
Shooters Factory EDC Cobra Belt Coyote
A soft trouser belt, width 4.4 cm, with a Cobra buckle. Made of special tape, Velcro and strong leather threads.
Shooters Factory EDC Cobra Belt Black
A soft trouser belt, width 4.4 cm, with a Cobra buckle. Made of special tape, Velcro and strong leather threads.
Shooters Factory EDC Cobra Belt Olive
A soft belt, width 4.4 cm, with a Cobra buckle. Made of special tape, velcro and strong leather threads.
Direct Action Mustang Inner Belt Multicam
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
Direct Action Mustang Inner Belt Coyote Brown
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
Direct Action Mustang Inner Belt Ranger Green
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
Direct Action Mustang Inner Belt Black
Our inner belt that works as a stabilizer for the MUSTANG®, WARHAWK® series and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders to provide a easy pistol draw. The belt is made of proprietary laminate and covered with molded Velcro® hooks, that are not so aggressive as standard hooks, yet will hold your outer belt on place even during prolonged use.
Features:
Size S: 80 – 90 cm / M: 90-100 cm / Size L: 100-110 cm / Size XL: 110-120 cm
Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort
Made out of proprietary laminate and Velcro® hook
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Additional laminate pull tabs
Anchor points for attaching bungie cord as additional security
Product Features
UPC
5902688007720
Weight
0.09 kg
Volume
299 cm3
Rozmiar
S/Regular
2 YEARS WARRANTY
ONLINE SUPPORT