Clawgear EDC G-Hook Small Waistpack Coyote
€49,90
3 in stock
Description
Features & Details
- Features:
- Amann sewing thread, Cordura, NIR, YKK-Zippers
Dimensions and weight
- Length:
- 22 cm
- Length packed:
- 29 cm
- Wide:
- 11 cm
- Width packed:
- 23 cm
- Height:
- 5.5 cm
- Height packed:
- 7 cm
- Weight:
- 0.242 kg
- Weight packed:
- 0.242 kg
Additional information
Weight | 242 g |
---|---|
Dimensions | 10 × 10 × 3 cm |
Related products
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
€37,95Add to cart
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
LedWave C-2 CAMO Coyote
Lumens: 100 / 36
Runtime: 60 minutes / 180 minutes
Reach: 129 meters
Weight (w/o batteries): 80 g
Bezel diameter: 32,75 mm Ø
Length: 133 mm
Led colour: White
Led type: CREE Led 3,5W
Functios intensity: High / Low
Battery type: 1xAA
Colour: Black, grey, coyote, yellow & green
Packaging: Blister
Included accessories: Battery
€35,90Read more
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
Magpul 5.56 3 Pack OD
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
Magpul 5.56 3 Pack OD
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
€14,90Read more
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart