Direct Action Spitfire MK II Slick Carbine Mag Flap – Multicam
€54,90
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
Out of stock
Additional information
| Weight | 119 g |
|---|---|
| Dimensions | 24 × 18 × 2 cm |
Related products
Warrior Recon Plate Carrier – MULTICAM
The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection.
Warrior Recon Plate Carrier – MULTICAM
The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection.
€178,00Select options
Warrior single NSR 5.56MM 90R MULTICAM
New 5.56mm NSR Mag Pouch holds 3 M4 / SA80 Mags also holds 3 Diemaco plastic coated 5.56mm mags. Elastic Draw cord can be tightened
Warrior single NSR 5.56MM 90R MULTICAM
New 5.56mm NSR Mag Pouch holds 3 M4 / SA80 Mags also holds 3 Diemaco plastic coated 5.56mm mags. Elastic Draw cord can be tightened
€24,00Read more
Warrior Tactical Wrist case MULTICAM
The Warrior Tactical Wrist Case has been specifically designed for SF units and JTACs etc. It is ideal for maps, building plans and
Warrior Tactical Wrist case MULTICAM
The Warrior Tactical Wrist Case has been specifically designed for SF units and JTACs etc. It is ideal for maps, building plans and
€26,00Read more
Warrior DCS Plate Carrier Base Multicam
The DCS (Dynamic Combat System) is a lightweight armour carrier with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches, the DCS is also capable of holding large ballistic plates 10″ x 12″ front and back and 6″ x 8″ side plates.
The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort.
The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).
Warrior DCS Plate Carrier Base Multicam
The DCS (Dynamic Combat System) is a lightweight armour carrier with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches, the DCS is also capable of holding large ballistic plates 10″ x 12″ front and back and 6″ x 8″ side plates.
The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort.
The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).
€164,00Select options
Warrior Covert Plate Carrier Black
Warrior’s Covert Plate Carrier (CPC) is a low profile slick armour carrier designed to hold 10 x 12 plates and US style
Warrior Covert Plate Carrier Black
Warrior’s Covert Plate Carrier (CPC) is a low profile slick armour carrier designed to hold 10 x 12 plates and US style
€85,00Read more
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
€240,00Read more
Warrior MBITR Radio Pouch GEN 2 MULTICAM
Warriors Elite Ops MBITR Gen II Front Flip Radio Pouch This Folding MBITR Pouch is designed to be worn with the radio controls facing
Warrior MBITR Radio Pouch GEN 2 MULTICAM
Warriors Elite Ops MBITR Gen II Front Flip Radio Pouch This Folding MBITR Pouch is designed to be worn with the radio controls facing
€29,00Read more
Warrior large utility molle MULTICAM
The Large Utility Pouch comes with Heavy Duty Zip and double reinforced stitching. SIZE 230mm Tall x 180mm Wide x 65mm Deep
Warrior large utility molle MULTICAM
The Large Utility Pouch comes with Heavy Duty Zip and double reinforced stitching. SIZE 230mm Tall x 180mm Wide x 65mm Deep
€29,00Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT