Princeton Tec CHARGE PRO MPLS TAN
€179,00
WARRANTY 1 Year
1 in stock
Description
The Charge Pro was designed to mount to various helmet rail systems, but has become more versatile including a wide variety of mounts that allow you to use the light on all of your gear. The Charge Pro runs off of a single CR123 Lithium battery, keeping it lightweight, extending burn time and standing up to colder climates.
The Charge Pro offers a clean white flood light for distance spotting or large area lighting and a lower lumen light output for close at hand administrative tasks when in the field. The white flood light is fueled by a Maxbright LED, while the lower lumen administrative lighting comes from 3 Ultrabright LEDs, which are available in a number of specialty color configurations. (Read more about our specialty LED color options here.) Choose your LED configuration in the drop down menu above.
Ease of performance in exacting situations was kept top-of-mind while designing the user interface, so the Charge Pro’s Maxbright white mode requires a full two-second button press to be turned on to avoid accidental activation.
Versatile, smart and tough, the Charge Pro (along with our other MPLS Helmet Lights) were created with our exclusive flexi-neck design allowing you to direct light where you need it, regardless of the angle of your helmet.
All Princeton Tec MPLS Helmet Lights come with the following mounts:
- Standard Nylon Headstrap
- Helmet Side Mount
- ARCs
- EXFIL Rail
- MOLLE/PALS
- Picatinny
- Above the Rail
Additional information
| Weight | 300 g |
|---|---|
| Dimensions | 25 × 15 × 7 cm |
Related products
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
€12,95Add to cart
Clawgear Merino Crew Socks Green
Developed in conjunction with European special forces, the socks from our Merino series, meet the highest performance standards for professional users. The socks are a blend of 49% Merino wool, 48% polyamid and 3% elastane. The hard wearing, shock absorbing, terry sole provides all day comfort while the mesh construction provides a pleasant foot climate.
Weight: 50 g
Shipping weight: 80 g
Clawgear Merino Crew Socks Green
Developed in conjunction with European special forces, the socks from our Merino series, meet the highest performance standards for professional users. The socks are a blend of 49% Merino wool, 48% polyamid and 3% elastane. The hard wearing, shock absorbing, terry sole provides all day comfort while the mesh construction provides a pleasant foot climate.
Weight: 50 g
Shipping weight: 80 g
€19,90Select options
0 Pos Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
0 Pos Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
AB Neg Bloodgroup Patch RAL 7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
AB Neg Bloodgroup Patch RAL 7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Read more
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
€8,90Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT