SchleTek Carbon – Cleaner 500 ml
€26,95
Time-saving removal of stubborn fouling. Special formula for heavily used firearms.
Frequent and thorough gun cleaning is not only a prerequisite to achieve maximum performance with your firearm, but also a decisive factor for your own safety during everyday’s use.
Especially on heavily used firearms, nitro and black powder fouling can be extremely hardened or burned in. Due to its special formula SchleTek Carbon-Cleaner is perfect to dissolve and remove even such stubborn residues.
Originally developed for the military, Carbon-Cleaner is a very effective nitro and black powder solvent for heavy-duty use. The highly active substances penetrate and dissolve even severe fouling. Therefore Carbon-Cleaner is perfect to clean the bores of black powder guns, powder burn marks on cylinders and barrels of revolvers, and to clean receivers and frames on the inside and on the outside, etc. In general, this would be a very time-consuming and labour-intensive task, but Carbon-Cleaner spares you the heavy work, hence you can fully concentrate on shooting.
Available as 150 ml pump spray and 500 ml aerosol.
3 in stock
Additional information
| Weight | 200 g |
|---|---|
| Dimensions | 21 × 4 × 4 cm |
Related products
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
A Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Princeton Tec SWITCH
SPECIFICATIONS
| POWER | 10 Lumens |
| BATTERIES | (2) 2016 Lithium Coin Cell |
| WEIGHT | 17 Grams |
Princeton Tec SWITCH
SPECIFICATIONS
| POWER | 10 Lumens |
| BATTERIES | (2) 2016 Lithium Coin Cell |
| WEIGHT | 17 Grams |
€60,50Read more
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
ITW Nexus Taclink Coyote
The Tac Link is a high strength polymer attachment device with GhillieTEX IR signature reduction technology. This product has considerable weight and
€8,90Add to cart
Manta Defense Momentary Switch Kit Tan FDE
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
Manta Defense Momentary Switch Kit Tan FDE
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
€37,95Add to cart
0 Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
0 Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT