Nightstick Compact Weapon-Monted Light TCM-10
The TCM-10 Compact Weapon-Mounted Light produces 650 lumens from a single CR123 battery. An engineered TIR lens projects a tight bright spot for threat identification and confirmation that reaches 136 meters. The lens also produces a crisply defined outer halo for additional situational feedback.
The TCM-10 features completely ambidextrous and intuitive rear-facing toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes. A user-programmable strobe mode and battery-safe mode are available when needed.
Constructed from aircraft-grade 6061-T6 aluminum with a polymer rear housing, the light includes five handgun-specific modular rail inserts (pre-configured with C1 insert for Glock pistols), two spare Allen screws, an Allen wrench, and one CR123 Lithium battery.
Features
- LED technology
- Ambidextrous rear-facing toggle switches
- Momentary or constant-on flashlight
- User-programmable strobe & battery-safe modes
- Aircraft-grade 6061-T6 aluminum housing
- Type III hard anodized finish
- Sharp, focused beam rated at 136 meters
- Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- 1 CR123 battery (included)
- Limited Lifetime Warranty
Nightstick Compact Weapon-Monted Light-Flat Dark Earth TCM-10F
The TCM-10F Compact Weapon-Mounted Light in flat dark earth produces 650 lumens from a single CR123 battery. An engineered TIR lens projects a tight bright spot for threat identification and confirmation that reaches 136 meters. The lens also produces a crisply defined outer halo for additional situational feedback.
The TCM-10F features completely ambidextrous and intuitive rear-facing toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes. A user-programmable strobe mode and battery-safe mode are available when needed.
Constructed from aircraft-grade 6061-T6 aluminum with a polymer rear housing, the light includes five handgun-specific modular rail inserts (pre-configured with C1 insert for Glock pistols), two spare Allen screws, an Allen wrench, and one CR123 Lithium battery.
Features
- LED technology
- Ambidextrous rear-facing toggle switches
- Momentary or constant-on flashlight
- User-programmable strobe & battery-safe modes
- Aircraft-grade 6061-T6 aluminum housing
- Type III hard anodized finish
- Sharp, focused beam rated at 136 meters
- Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- 1 CR123 battery (included)
- Limited Lifetime Warranty
Nightstick Dual-Beam Long Gun Light Kit W/IR Illuminator LGL-180-IR
The LGL-180-IR long gun light with IR illuminator is a dual-wavelength weapon lighting system for your rifle, carbine, or shotgun. A hybrid dual reflector with two dedicated LEDs (IR and VIS) means each beam is optimally focused for ultra-high intensity and maximum distance. The 180-IR projects 1100 lumens of visible white light out to 229 meters for 2 hours, while a separate 1400mw 940nm IR illuminator beam provides a similar range and runtime during night vision use.
A rotating collar on the bezel allows the user to select visible (VIS) or infrared (IR) modes, or OFF. The light comes installed with a standard tail cap switch and reversible thumbscrew Picatinny mount. It can alternatively be mounted with the included offset Picatinny mount, providing flexible options to clear front sights and other mounted equipment while allowing easy support hand activation.
Both the tail cap switch as well as the included 6″ remote pressure pad/switch feature momentary or constant-on modes. The kit also includes an RPS Picatinny rail mount and Nightstick-exclusive wire management rail clamp to prevent cable snags. The 180-IR weapon light kit includes (2) CR123 batteries. As a bonus, the multi-fuel 180-IR also runs on a single 18650 lithium-ion battery. A pair of 4700-BATT lithium-ion batteries and a single-cell charger are sold separately.
Included in the kit:
- LGL-180-IR weapon light
- LGL-ENDCAP3 tail cap switch
- LGL-RPS3 remote pressure switch (6” cable)
- LGL-SM1 standard Picatinny mount w/thumb screw
- LGL-OM1 45º offset Picatinny mount w/thumb screw
- NS-PIC2 pressure switch rail mount
- NS-WM1 wire management clamp
- (2) CR123 batteries
- Allen wrench
- Alcohol prep pad
- Adhesive-backed Velcro mounting strip
- Instruction manual LGL-180-IR
-
Features
- Dual Beam Design — Both white (VIS) and IR Light
- Features both tail cap and 6″ Remote Pressure Switches
- Momentary or constant-on function
- Standard and offset Picatinny rail mounts
- Sharp focused beam for distance illumination
- Aircraft-grade 6061-T6 aluminum housing w/Type III hard-anodized finish
- VIS beam distance rated at 229meters
- 940nm 1400mw IR illuminator
- IP-X7 Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- (2) CR123 batteries included
- Dual-fuel capability with optional li-ion 4700-BATT
- Limited Lifetime Warranty
Nightstick Turbo High Candela Long Gun Light Kit LGL-160-T
The LGL-160-T Turbo Long Gun Light Kit adds long-distance target discrimination to your rifle, carbine, or shotgun. Made of 6061-T6 aluminum and hard anodized black, it produces 100,000 candela and 800 lumens with a 2-hour runtime. Designed around a new high-intensity parabolic reflector, the tightly focused beam has a 632-meter beam distance.
The light comes installed with a standard tail cap switch and reversible thumb-screw Picatinny mount. It can be mounted with the included offset Picatinny mount, providing flexible options to clear front sights and other mounted equipment while allowing easy support hand activation. Both the tail cap switch and the included 6″ remote pressure pad/switch feature momentary or constant-on modes. The kit also includes an RPS Picatinny rail mount and Nightstick-exclusive wire management rail clamp to prevent cable snags. It comes with two CR123 batteries but can be upgraded to lithium-ion rechargeable with the optional 18650-KIT.
Included in the kit:
- LGL-160-T Turbo weapon light
- LGL-ENDCAP2 tail cap switch
- LGL-RPS2 remote pressure switch (6” cable)
- LGL-SM1 standard Picatinny mount w/thumb screw
- LGL-OM1 45º offset Picatinny mount w/thumb screw
- NS-PIC2 pressure switch rail mount
- NS-WM1 wire management clamp
- (2) CR123 batteries
- Allen wrench
- Alcohol prep pad
- Adhesive-backed Velcro mounting strip
- Instruction manual LGL-160-T
-
Features
- 100,000 candela
- Features both tail cap and 6″ Remote Pressure Switches
- Momentary or constant-on function
- Standard and offset Picatinny rail mounts
- Long-distance beam (632m)
- Aircraft-grade 6061-T6 aluminum housing w/Type III hard-anodized finish
- IP-X7 Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- 2 CR123 batteries (included)
- Limited Lifetime Warranty
Nightstick Tactical Weapon-Mounted Light TWM-30
Nightstick’s TWM-30 Tactical Weapon-Mounted Light features a 1200-lumen LED with a 194-meter beam distance. Optimized for threat identification and target discrimination, its clearly defined halo provides peripheral illumination in CQB situations.
This weapon light features new enhanced single-motion ambidextrous switches that operate the momentary-on and constant-on lighting modes. It also features user-selectable strobe and battery-safe modes, easily enabled or disabled with two unique, simultaneous switch actions. Providing 1.75 hours of runtime from two included CR123 batteries, the housing of the TWM-30 is constructed from black anodized aircraft-grade 6061-T6 aluminum with a glass-filled nylon polymer battery door. The TWM-30 fits in all existing TWM-Series compatible holsters including duty, OWB, IWB, and AIWB models. (Not compatible with rechargeable batteries.)
Features
- LED technology
- Enhanced single-motion switches
- User-selectable battery safe and strobe modes
- Momentary or constant-on flashlight
- Sharp focused beam for distance illumination
- Aircraft-grade 6061-T6 aluminum housing
- Type III hard anodized finish
- Beam distance rated at 194 meters
- IP-67 Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- 2 CR123 batteries (included)
- Limited Lifetime Warranty
Nightstick Tactical Weapon-Mounted Light – Long Gun TWM-852XL
The TWM-852XL Tactical Weapon-Mounted Long Gun Light uses an LED rated 850 lumens for 1.75 hours providing a beam distance of 245 meters. The rear-facing single switch provides both momentary and constant-on lighting operation. Designed to securely attach to a long gun Picatinny rail, the IP-X7 rated waterproof housing is constructed from aircraft-grade 6061-T6 aluminum. The TWM-852XL comes preinstalled with one set (2) cross-rail inserts. An Allen wrench and 2 CR123 lithium-metal batteries and also included for quick installation and operation. (Not compatible with rechargeable batteries.)
Features
- LED technology
- Single switch functionality
- Momentary or constant-on flashlight
- Sharp focused beam for distance illumination
- Light comes pre-installed with 1 set (2) cross-rail inserts
- Aircraft-grade 6061-T6 aluminum housing
- Type III hard anodized finish
- Beam distance rated at 245 meters
- IP-X7 Waterproof
- Impact & chemical resistant
- Serialized for personal identification
- 2 CR123 batteries (included)
- Limited Lifetime Warranty
MOG Glove Holder Black 2110B
MOG Glove Holder Black 2110B
APPLICATIONS
- Secure storage system for gloves, ropes, keys,…
TARGET GROUP
- Armed / Special Forces
- Law Enforcement
- Special Units Police
- Security
- Customs,…
SIZE
One size
KEY FEATURES
- Strong hook and loop fasteners that are less likely to retain dirt and sand
- Universal system for molle or belt. Perfect for plate carriers, backpacks & all belt systems
- Strong & durable steel hook carabiners. Multiple system for gloves, keys,…
- Multi-purpose system for gloves, ropes,…
- Easy to open and close with additional tab
MOG Target High Abrasion ErgoShield 8110 Multicam
Armed / special forces, law enforcement, special units police, security, customs
All-round performance makes these gloves the ultimate choice for those looking for a combination of extreme durability, dexterity and versatility in a single high performance glove. Combined with ergonomically designed impact protection that you don’t feel.
APPLICATIONS
- Weapon handling
- Allround tactical operations
- Searches
- Patrolling
TARGET GROUP
- Armed / Special Forces
- Law Enforcement
- Special Units Police
- Security
- Customs
SIZE
6 – 12
STANDARDS
- EN 388:2019
- EN 407:2020
- EN ISO 21420:2020
-
KEY FEATURES
- ErgoShield technology: 3D moulded TPR design without being felt
- Extreme high abrasion resistance and good grip
- Slim fit
- Unique dexterity
- High finger sensitivity
MOG Target High Abrasion ErgoShield 8110 Black
Armed / special forces, law enforcement, special units police, security, customs
All-round performance makes these gloves the ultimate choice for those looking for a combination of extreme durability, dexterity and versatility in a single high performance glove. Combined with ergonomically designed impact protection that you don’t feel.
APPLICATIONS
- Weapon handling
- Allround tactical operations
- Searches
- Patrolling
TARGET GROUP
- Armed / Special Forces
- Law Enforcement
- Special Units Police
- Security
- Customs
SIZE
6 – 12
STANDARDS
- EN 388:2019
- EN 407:2020
- EN ISO 21420:2020
-
KEY FEATURES
- ErgoShield technology: 3D moulded TPR design without being felt
- Extreme high abrasion resistance and good grip
- Slim fit
- Unique dexterity
- High finger sensitivity
MOG Target Combat 9106 Black
MOG Target Combat Coyote Brown 9106
Armed forces, special assistance units, law enforcement
The first high-flexibility combat glove with D3O protection that feels like a second skin, this groundbreaking design offers extreme finger sensitivity and unparalleled dexterity, allowing you to perform tasks with precision as if you weren’t wearing gloves at all.
2 YEARS WARRANTY
ONLINE SUPPORT