SchleTek Suppressor Cleaner Evolution 500 ml
Highly effective, fast and easy to use cleaner for suppressors of all types, materials and coatings. No more laborious cleaning procedures due to self-active cleaning formula that makes short work of stubborn fouling.
Modern suppressors combine several advantages: Noise suppression, recoil reduction and precision enhancement. But as the degree of accumulated fouling increases, the performance of the suppressor drops substantially. Therefore, suppressor cleaning should not be disregarded and the suppressor be cleaned regularly. If no manufacturer´s recommendation exists, suppressors should be cleaned, at least, when heavily soiled or when they have not been in use over a longer period of time to prevent the formation of acidic condensates.
Suppressor Cleaner Evolution has been developed in collaboration with the world´s leading manufacturer of suppressors for the military and the authorities, Swiss B&T AG based in Thun. SchleTek Evolution is easy to use and rapid acting. It cleans all types of suppressors with its special self-active cleaning formula and removes even stubborn fouling. Laborious cleaning procedures are now a thing of the past.
Even suppressors which cannot be disassembled, carbon suppressors and suppressors with rows of holes or super-fine suppression maximising baffles, which are usually very difficult to clean, can be cleaned easily and effortless with SchleTek Evolution. The suppressor has to be closed on one end, and then filled with the cleaner from the opposite end. Suppressors which can be taken apart are simply put into a container filled with SchleTek Evolution. After a reaction time of only 20 to 30 minutes, for stubborn fouling up to a maximum of 120 minutes, all residue can be easily flushed out or rinsed off with warm water. Heating to approximately 50°C (122°F) additionally increases cleaning efficiency. SchleTek Evolution is also suitable for ultrasonic baths.
SchleTek Suppressor Cleaner Evolution is environmentally friendly, water soluble, and has been positively tested for compatibility of materials. Due to its special pH-neutral formula it does not harm any surfaces and is suitable for all materials and coatings, including Cerakote™.
To protect and preserve suppressors, spray SchleTek 2in1 Gun-Tuning on thread and suppressor after cleaning and fully drying.
Available in 500 ml bottle, 1 litre bottle, and 5 litre canister. Additional sizes available on request.
SchleTek 2 in 1 Gun-Tuning 200 ml
Schletek 2 in 1 Gun tuning, is a high quality PTFE and ceramic spray cleaner. applicable only on firearms airguns and knives. Hugh temperature resistance from -40 °C to +750 °C.
SchleTek 2 in 1 Gun-Tuning 100 ml
Schletek 2 in 1 Gun tuning, is a high quality PTFE and ceramic spray cleaner. applicable only on firearms airguns and knives. Hugh temperature resistance from -40 °C to +750 °C.
SchleTek Bore Cleaner 200 ml
SchleTek Bore Cleaner 200 ml
Bore Cleaner comprises of several high quality cleaning agents and complexes especialy developed to clean barrels. Bore Cleaner penetrates and removes dirt such as: Tombac, copper, zinc, gunpowder residue, lead and oil. Acid and ammonia-free.
SchleTek Gun-Tuning Sniper Grease 50g
GTS Grease has been especialy designed for applications of weapons for use in plastic-plastic or plastic-metal. It has excellent release and slip properties.
SchleTek Gun Cleaner 500 ml
SchleTek Gun Cleaner 500 ml
Schletek Gun Cleaner cleans and degreases virtually any material or dirty surface such as metal wood, plastic, rubber, neoprene, leather, varnished and sealed surfaces. Gun Cleaner cleans grease, oil, wax, blood, insects and dust. Economical and efficient Removes gunpowder residue, oils and…
Safariland Quick Locking System Kit 1 FDE
The QUICK-KIT includes the QLS 19 Locking Fork and QLS 22 or QLS 22L (Extra Locking Feature) Receiver Plate components. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The QLS (Quick Locking System) allows for quick transfer of gear between attachment points such as a belt loop, tactical leg shroud or other stable platform. The QLS fork and plate combination passes the Level I Retention™ pull test. Allows users to rearrange gear quickly and easily without the use of tools. Hardware and Allen wrench included. Available in Black, FDE Brown, Foliage Green, OD Green or Coyote Brown.
SAFARILAND 71 Magazine Pouch -Tactical NO Belt Loop FDE
This Model 71 Magazine Pouch fits most 9mm, .40 caliber, single stack and double stack .45 ACP mags, flashlights, knives and multi-tools. The flexible accordion design means it fits almost everything.
Safariland 6004-16 MOLLE Locking System Accessory Locking Fork (MLS 16) Coyote Brown
The MLS 16 Accessory Locking Fork mounts directly to the back of Safariland pouches with the 2-hole pattern. It can then be threaded through MOLLE loops or connected to the QLS 22 Receiver Plate. Use with this receiver plates allows for quick transfer of gear between attachment points such as a MOLLE vest, belt loop, tactical leg shroud or other stable platform. This fork is also required when use of the smaller ELS plates is warranted. This injection molded piece is adjustable to a variety of angles for convenient carry. Rearrange gear quickly and easily without the use of tools. It is designed to break away at 140 lbs. per military specifications. Available in Black, FDE Brown, Foliage Green, OD Green or Coyote Brown.
Warrior Bungee Weapon Retention Coyote Tan
The Warrior Assault Systems bungee weapon retention strap is perfect for securing your weapon when you’re on the move or for prisoner handling. Its flexible design works in conjunction with most weapon slings. The retention strap attaches to MOLLE on the rear of your vest then the strap goes around the outside of your weapon and hooks onto the front MOLLE on your vest to secure your weapon in place.
Safariland 6004-15 MOLLE Locking System Accessory Locking Fork (MLS 15) FDE
The MLS 15 Accessory Locking Fork mounts directly to the back of Safariland pouches with the 2-hole pattern. It can then be threaded through MOLLE loops or connected to the QLS 22 Receiver Plate. Use with this receiver plates allows for quick transfer of gear between attachment points such as a MOLLE vest, belt loop, tactical leg shroud or other stable platform. This fork is also required when use of the smaller ELS plates is warranted. This injection molded piece is adjustable to a variety of angles for convenient carry. Rearrange gear quickly and easily without the use of tools. It is designed to break away at 140 lbs. per military specifications. Available in Black, FDE Brown, Foliage Green, OD Green or Coyote Brown.
SAFARILAND Quick Locking System Kit 3 FDE – Flat Dark Earth
The QUICK-Kit3 includes one QLS 19 Locking Fork and two QLS 22 Receiver Plates. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The QLS (Quick Locking System) allows for quick transfer of gear between attachment points such as a belt loop, tactical leg shroud or other stable platform. The QLS fork and plate combination passes the Level I Retention™ pull test.
https://youtu.be/Au64t1OgnoM
Surefire SC1 Spare Battery Carrier
Spares Carrier, 6-battery, Short
- Keeps your batteries and spare lamp assemblies neatly organized
- Impact-resistant polymer protects contents
- A solid battery storage option for emergency preparedness
Pack More Power. The SC1 Spares Carrier holds six 123A lithium batteries plus one of following shorter style lamp assemblies: P60, P60L, P61, P90, P91, R30, R60, MN01, MN02, MN03, MA02. Made from see-through impact-resistant polymer. Spares Carriers are “must-have” items for prepared individuals. Batteries and lamp not included.
Surefire G2X™ LAW ENFORCEMENT EDITION
Dual-Output LED Flashlight
- The stripped-down, ready-to-rock, LE light
- 600 lumens at high output, tailored to reach far into the night/15 lumens of low output to facilitate administrative tasks
- Rugged polymer body — easy handling in extreme weather conditions
Answer The Call. The G2X LE is a value-packed tactical light specifically designed at the request of Canadian law enforcement agencies, and it’s tough enough to meet the needs of cops around the globe. Its rugged polymer body is easy to hold with a bare hand even in freezing temperatures, while its high-performance LED generates a max output of 600 lumens focused by a parabolic reflector for significant reach and ample surround light to provide the situational awareness critical in law enforcement. The 15-lumen low output extends runtime while producing ample light for less critical tasks, but its click-style tailcap accesses high-output mode first to maintain its tactical edge.
Surefire X300U – A Black
Surefire X300U – A Black
- The best-selling SureFire WeaponLight, now generating 1,000 lumens
- T-slot thumbscrew clamp attaches securely to Universal and Picatinny rails found on most handguns.
- Accessory switches for pistols and tape switch for long guns available. Activate without altering grip
Trust The Standard. Popular with law enforcement and military operators around the world, our best-selling WeaponLight now delivers a stunning 1,000 lumens of LED-generated output. Focused by a precision TIR lens, it creates a far-reaching high-intensity beam with a larger center spot that is ideal for close- to medium-range engagements. You can count on the X300U-B to help you positively identify threats at significant distances while temporarily impairing your adversary’s vision. It also provides extensive peripheral illumination for maintaining situational awareness. Ambidextrous switching provides one-finger control of momentary-on or constant-on activation. Its rugged, aerospace aluminum body is Mil-Spec hard anodized for scratch and corrosion resistance and sealed to make it weatherproof. It’s also IPX7 waterproof to 1 meter for 30 minutes. The X300U-B delivers a standard of excellence you can trust.
https://www.youtube.com/watch?v=bva-gCWLG3c
2 YEARS WARRANTY
ONLINE SUPPORT