CLAWGEAR Multi Purpose ID Holder Multicam
€25,90
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.
The Multi-Purpose ID Holder is an ID card sleeve which can be attached to any Velcro surface or to an included neck-strap adapter.
Features:
– Designed for ID cards
– Made of bonded Laminate for extreme robustness
– Adjustable neck strap
– Detachable ID card compartment with HOOK fastener
– Two flat card slots on the rear of the holder
Fabrics:
– 500D Nylon bonded with NBR fabric
– Woojin plastic parts
Dimensions:
Height: 13cm
Width: 8,5cm
ID card pocket window size:
Height: 9cm
Width: 6,5cm
Weight: 80 g
Shipping weight: 60
1 in stock
Additional information
| Weight | 80 g |
|---|---|
| Dimensions | 5 × 5 × 2 cm |
Related products
CLAWGEAR MK.II STORM POCKET LIGHTER Black
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
CLAWGEAR MK.II STORM POCKET LIGHTER Black
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
€4,90Read more
Clawgear EDC G-Hook Small Waistpack Coyote
Features & Details Features: Amann sewing thread, Cordura, NIR, YKK-Zippers Dimensions and weight Length: 22 cm Length packed: 29 cm Wide: 11
Clawgear EDC G-Hook Small Waistpack Coyote
Features & Details Features: Amann sewing thread, Cordura, NIR, YKK-Zippers Dimensions and weight Length: 22 cm Length packed: 29 cm Wide: 11
€49,90Add to cart
Magpul 5.56 3 Pack FDE
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
Magpul 5.56 3 Pack FDE
When installed on the base of a 5.56×45 rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical
€14,90Read more
Magpul® DAKA® Volume Pouch Black
Three liters of storage + DAKA protection
The DAKA Volume Pouch was specifically designed to maximize usable storage space while maintaining a compact footprint. Its intuitive design allows the Volume Pouch to stand vertically on its own and expand up to three liters in size when in use. The wide mouth and water-resistant zippered opening allow the user to insert and remove items with one hand without having to hold it open with the other. The large translucent window makes organizing and locating gear even easier, and a single large carabiner attachment point doubles as a lashing point and carrying handle so your stored gear will always be at hand when needed.
Like our other DAKA pouches, the Volume Pouch is made from polymer-infused textiles that are RF-welded on all seams and use water-resistant zippers. The construction methods and materials we use mean that our DAKA pouches are at home in hard use applications such as tool storage, as well as for lighter duties such as organizing your personal electronics. These water-resistant pouches will keep your gear dry in most wet environments, making them a great choice for most outdoor adventures.
Magpul® DAKA® Volume Pouch Black
Three liters of storage + DAKA protection
The DAKA Volume Pouch was specifically designed to maximize usable storage space while maintaining a compact footprint. Its intuitive design allows the Volume Pouch to stand vertically on its own and expand up to three liters in size when in use. The wide mouth and water-resistant zippered opening allow the user to insert and remove items with one hand without having to hold it open with the other. The large translucent window makes organizing and locating gear even easier, and a single large carabiner attachment point doubles as a lashing point and carrying handle so your stored gear will always be at hand when needed.
Like our other DAKA pouches, the Volume Pouch is made from polymer-infused textiles that are RF-welded on all seams and use water-resistant zippers. The construction methods and materials we use mean that our DAKA pouches are at home in hard use applications such as tool storage, as well as for lighter duties such as organizing your personal electronics. These water-resistant pouches will keep your gear dry in most wet environments, making them a great choice for most outdoor adventures.
€31,00Add to cart
CLAWGEAR MK.II STORM POCKET LIGHTER Coyote
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
CLAWGEAR MK.II STORM POCKET LIGHTER Coyote
– Windproof Jet Flame
– Adjustable micro burner up to 1300°C
– Piezo ignition
– Gas-refillable
– Non-reflective – black mat
– Soft grip surface
– Quiet open / close securecap
– Lightweight
€4,90Add to cart
Tasmanian Tiger Bag S/M/L/XL
- Waterproof, air-permeable T-Vent 3L base for compression
- Waterproof roll-up closure
Tasmanian Tiger Bag S/M/L/XL
- Waterproof, air-permeable T-Vent 3L base for compression
- Waterproof roll-up closure
€13,00Select options
Arc’Teryx Leaf E 220 Rigger’s Harness
E·220 Riggers Harness
A rigger’s harness system that can be used either in an expedient harness configuration (belt and sling), or in a rigger’s belt configuration (belt only) for travel restraint, specifically designed for military or law enforcement tactical operations.
Product Certification:
- EN 358 Certified (Rigger’s Belt configuration without leg loops
- EN 12277 Certified (Rigger’s Harness configuration with leg loops)
Colours:
Black, Coyote, Multicam.
Sizes:
XS, S, M, L, XL, XXL, XXXL, XXXXL
Weight:
245 g / 8.6 oz
Model:
11783
Technical Features
- Easily stored, lightweight, supple
Design & Fit
- Comfortable under body armour or thigh rig
Waist & Belt Configuration
- Belt width is c.2” allowing belt to be worn in conjunction with LEAF Combat Uniform pants
Harness Features
- WST™ (Warp Strength Technology) load is evenly supported across entire harness structure
- Self-locking non-reflective anodized black buckle
- Reinforced attachment loop for the attached extension of a safety belt lanyard in order to allow for end-user attachment to rotary wing platforms
- 11mm webbing gear loops allows for optional load or tool carriage
- Vapor Mesh™ sling allows for the expedient creation of two lightweight and breathable leg loops when the sling is attached by a carabiner to the reinforced attachment loop
- Bound mesh sling edge is tidy and durable
- Emergency harness set-up in a single pouch
- Regular width WST™ (Warp Strength Technology™) swami belt
Arc’Teryx Leaf E 220 Rigger’s Harness
E·220 Riggers Harness
A rigger’s harness system that can be used either in an expedient harness configuration (belt and sling), or in a rigger’s belt configuration (belt only) for travel restraint, specifically designed for military or law enforcement tactical operations.
Product Certification:
- EN 358 Certified (Rigger’s Belt configuration without leg loops
- EN 12277 Certified (Rigger’s Harness configuration with leg loops)
Colours:
Black, Coyote, Multicam.
Sizes:
XS, S, M, L, XL, XXL, XXXL, XXXXL
Weight:
245 g / 8.6 oz
Model:
11783
Technical Features
- Easily stored, lightweight, supple
Design & Fit
- Comfortable under body armour or thigh rig
Waist & Belt Configuration
- Belt width is c.2” allowing belt to be worn in conjunction with LEAF Combat Uniform pants
Harness Features
- WST™ (Warp Strength Technology) load is evenly supported across entire harness structure
- Self-locking non-reflective anodized black buckle
- Reinforced attachment loop for the attached extension of a safety belt lanyard in order to allow for end-user attachment to rotary wing platforms
- 11mm webbing gear loops allows for optional load or tool carriage
- Vapor Mesh™ sling allows for the expedient creation of two lightweight and breathable leg loops when the sling is attached by a carabiner to the reinforced attachment loop
- Bound mesh sling edge is tidy and durable
- Emergency harness set-up in a single pouch
- Regular width WST™ (Warp Strength Technology™) swami belt
€130,00Select options
ITW Nexus North America Web Dominator
Web Dominator
ITW Nexus North America announces a new addition to the GhilleTEXTM product line, The Web Dominator. The Web Dominator is designed to assist operators in securing their loose nylon web straps, and to help tie down any items that you don’t want hanging loose off your kit. The Web Dominator is the perfect solution to secure your hydration tube or comms gear in a custom position to suit your own personal set up. The field replaceable design allows you to install and remove without cutting or sewing. The elastic cord knot can be modified for securing large or small items or bundles of webbing. Eliminate those nasty hanging web straps that present potential trip and snagging hazards by installing the Web Dominator on your gear.
Colors Available: Black, Tan 500, Coyote Brown, Foliage Green
ITW Nexus North America Web Dominator
Web Dominator
ITW Nexus North America announces a new addition to the GhilleTEXTM product line, The Web Dominator. The Web Dominator is designed to assist operators in securing their loose nylon web straps, and to help tie down any items that you don’t want hanging loose off your kit. The Web Dominator is the perfect solution to secure your hydration tube or comms gear in a custom position to suit your own personal set up. The field replaceable design allows you to install and remove without cutting or sewing. The elastic cord knot can be modified for securing large or small items or bundles of webbing. Eliminate those nasty hanging web straps that present potential trip and snagging hazards by installing the Web Dominator on your gear.
Colors Available: Black, Tan 500, Coyote Brown, Foliage Green
€2,50Select options
2 YEARS WARRANTY
ONLINE SUPPORT