Clawgear PMAG Legalizer Minus 20 RDS 3-Pack
€12,90
Out of stock
Description
The PMAG® Legalizer is intended to be installed into 30 round Magpul® PMAG® magazines of 2nd or 3rd generation to reduce the capacity down to 10 rounds. Installation of this high-quality product made from glass fiber reinforced polymer is simple and does not require any tools. No permanent modification of the magazine is necessary.
NOTE: The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity. Make sure to check all laws and regulations in your country to determine the legality of your magazines.
Magpul® and PMAG® are registered trademarks owned by Magpul Industries Corp. Neither Clawgear, nor TMH Trading GmbH are affiliated in any manner with or otherwise endorsed by, Magpul Industries Corp. For genuine Magpul products and parts visit www.magpul.com.
- Magazine capacity:
- 20 rds
DIMENSIONS AND WEIGHT
- Length:
- 13 cm
- Length packed:
- 23.4 cm
- Wide:
- 6 cm
- Width packed:
- 13 cm
- Height:
- 1 cm
- Height packed:
- 1.3 cm
- Weight:
- 0.054 kg
- Weight packed:
- 0.072 kg
Additional information
| Weight | 200 g |
|---|---|
| Dimensions | 10 × 5 × 10 cm |
Related products
Princeton Tec SWITCH
SPECIFICATIONS
| POWER | 10 Lumens |
| BATTERIES | (2) 2016 Lithium Coin Cell |
| WEIGHT | 17 Grams |
Princeton Tec SWITCH
SPECIFICATIONS
| POWER | 10 Lumens |
| BATTERIES | (2) 2016 Lithium Coin Cell |
| WEIGHT | 17 Grams |
€60,50Read more
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart
Princeton Tec CHARGE PRO MPLS TAN
WARRANTY 1 Year
Princeton Tec CHARGE PRO MPLS TAN
WARRANTY 1 Year
€179,00Add to cart
B Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
B Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Black
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT