Clawgear PMAG Legalizer Minus 20 RDS 3-Pack
€12,90
Out of stock
Description
The PMAG® Legalizer is intended to be installed into 30 round Magpul® PMAG® magazines of 2nd or 3rd generation to reduce the capacity down to 10 rounds. Installation of this high-quality product made from glass fiber reinforced polymer is simple and does not require any tools. No permanent modification of the magazine is necessary.
NOTE: The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity. Make sure to check all laws and regulations in your country to determine the legality of your magazines.
Magpul® and PMAG® are registered trademarks owned by Magpul Industries Corp. Neither Clawgear, nor TMH Trading GmbH are affiliated in any manner with or otherwise endorsed by, Magpul Industries Corp. For genuine Magpul products and parts visit www.magpul.com.
- Magazine capacity:
- 20 rds
DIMENSIONS AND WEIGHT
- Length:
- 13 cm
- Length packed:
- 23.4 cm
- Wide:
- 6 cm
- Width packed:
- 13 cm
- Height:
- 1 cm
- Height packed:
- 1.3 cm
- Weight:
- 0.054 kg
- Weight packed:
- 0.072 kg
Additional information
| Weight | 200 g |
|---|---|
| Dimensions | 10 × 5 × 10 cm |
Related products
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
Manta Defense Vertical Grip Sleeves (1.0″ ID) Tan FDE
The MANTA Vertical Grip Sleeve is a revolutionary product that was designed to fit standard size vertical grips no larger than 1.25 inches in diameter. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Integrate momentary activation pressure pads onto the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the the Vertical Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold switches on a grip. The Vertical Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most vertical grips up to 1.25 inches in diameter. Please check out our larger (1.25″ID) M108X series of Vertical Grip Sleeves if a larger vertical grip is being used such as a Grip Pod. We are proud to say that this product is standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as to Militaries around the world.
€23,95Add to cart
Princeton Tec CHARGE PRO MPLS TAN
WARRANTY 1 Year
Princeton Tec CHARGE PRO MPLS TAN
WARRANTY 1 Year
€179,00Add to cart
Manta Defense M-Lok Rail Guards Tan FDE
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Tan FDE
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
B Neg Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
€37,95Add to cart
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense Vertical/Pistol Grip Sleeves (1.25″ ID) Black
The MANTA Vertical/Pistol Grip Sleeve is a revolutionary product that was designed to fit larger vertical grips such as the Grip Pod. The sleeve will also fit over most pistol grips creating an extreme tactile feel. The sleeve fits snugly over a grip converting it into a multifunctional part of the weapon! Create a recoil buffer by installing the Micro Pocket to the rear when mounting to a pistol grip. Integrate momentary activation pressure pads into the vertical grip utilizing MANTA Micro Pocket technology. Simply slide a switch into the Micro Pocket and slide the Grip Sleeve onto the grip! Say goodbye to bicycle inner tubes, zip ties and tape to hold a switch on the grip. The Grip Sleeve also features a switch protection channel to help prevent accidental engagement. The revolutionary Grip Sleeve material will stretch and conform to most larger size (1.25″ ID) vertical grips and pistol grips. Please check out our smaller (1.0″ID) M107X series of Vertical Grip Sleeves if a smaller vertical grip is being used. We are proud to say that this product is standard issue to Militaries around the world.
€24,95Add to cart
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
A Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT