Clawgear Smoke Grenade Pouch Core RAL7013
€21,90
1 in stock
Description
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.
The Smoke Grenade Pouch Core is designed to store common smoke grenades. The pouch has ambidextrous safety lever locking loops for improved safety and its closed with a plastic buckle.
Features:
- Designed for standard sized smoke grenades
- Made of 500D Nylon
- Plastic buckle opening/closure
- MOLLE system compatible
- Ambidextrous safety lever locking loops
Fabrics:
- 500D Nylon
- Woojin plastic buckle
- Nylon Webbing
Dimensions:
Height: 13cm
Width: 8cm
Depth: 5cm
Features:Amann sewing thread, Cordura, NIR, YKK-Zippers
Military/Commercial Spec:Mil spec
Additional information
Weight | 50 g |
---|---|
Dimensions | 10 × 4 × 3 cm |
Related products
SAFARILAND L930 – Nylon EDC NexBelt® 1.5″ (38mm)
L930 – Nylon EDC NexBelt® 1.5″ (38mm)
Designed for the firearm industry but can be used for any field that requires attaching tactical and technical equipment and tools to your belt. Our nylon belts are manufactured with high-density nylon of an advanced composite of ultra-fine polyester for extra stiffness and durability. In addition, our belts have a water-repellent liner to stop sweat from seeping and staining the surface of the belt. Now you can conceal in comfort and style.
- One handed, on the fly, belt adjustments, especially useful when putting on, or removing an IWB holster
- 1/4” incremental belt adjustments instead of standard 1” adjustments
- Heavy-duty high-density nylon, for extra stiffness and durability for everyday carry of firearms
- Water repellent liner
- One size fits majority of people, up to 50” waist, simply cut off excess and install buckle
- 1.5″ width
SAFARILAND L930 – Nylon EDC NexBelt® 1.5″ (38mm)
L930 – Nylon EDC NexBelt® 1.5″ (38mm)
Designed for the firearm industry but can be used for any field that requires attaching tactical and technical equipment and tools to your belt. Our nylon belts are manufactured with high-density nylon of an advanced composite of ultra-fine polyester for extra stiffness and durability. In addition, our belts have a water-repellent liner to stop sweat from seeping and staining the surface of the belt. Now you can conceal in comfort and style.
- One handed, on the fly, belt adjustments, especially useful when putting on, or removing an IWB holster
- 1/4” incremental belt adjustments instead of standard 1” adjustments
- Heavy-duty high-density nylon, for extra stiffness and durability for everyday carry of firearms
- Water repellent liner
- One size fits majority of people, up to 50” waist, simply cut off excess and install buckle
- 1.5″ width
€75,00Add to cart
Source Tactical 3L Hydration Pack Multicam
A lightweight hydration pack by SOURCE Our most popular hydration system. 3 usage modes: can be worn backpack style, inserted in rucks,
Source Tactical 3L Hydration Pack Multicam
A lightweight hydration pack by SOURCE Our most popular hydration system. 3 usage modes: can be worn backpack style, inserted in rucks,
€85,00Read more
Warrior Elite OPS FRAG BELT – Multicam
The Warrior Frag Belt is a large high backed version of our PLB Belt, with the added ability to accept a Level
Warrior Elite OPS FRAG BELT – Multicam
The Warrior Frag Belt is a large high backed version of our PLB Belt, with the added ability to accept a Level
€69,00Read more
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
€240,00Read more
WARRIOR UNIVERSAL PISTOL HOLSTER LEFT HAND COYOTE TAN
Now available for left handed operators. The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide
WARRIOR UNIVERSAL PISTOL HOLSTER LEFT HAND COYOTE TAN
Now available for left handed operators. The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide
€58,00Add to cart
WARRIOR UNIVERSAL PISTOL HOLSTER MULTICAM
The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide variety of large and small frame
WARRIOR UNIVERSAL PISTOL HOLSTER MULTICAM
The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide variety of large and small frame
€58,00Add to cart
Warrior DCS Plate Carrier base COYOTE
Warrior DCS Plate Carrier base COYOTE
€158,00Select options