Safariland 6075CUBL CANTABLE BELT LOOP 2.25″ Slotted Low Ride Black
The Cantable Belt Loop (CUBL) allows the user to choose the cant position on their holster based on their preference. Extremely adaptable, the CUBL integrates with Safariland UBL products and 3-hole patterned holsters.
- For use with Safariland 3-hole patterned duty holster
- Passes Retention™ pull test
- QLS compatible
- Fits belt width 2” (50mm) or 2.25” (58mm)
https://youtu.be/R4BS8JmaW6k
Safariland 6072CUBL-2 HI-RIDE UBL 2,25″ Black
The 6072UBL is a hi-ride belt loop. It will not pinch or add pressure to hip bone, locks onto the duty belt with belt slot design, and is compatible with any holster with the 3-hole pattern.
- Will not pinch or add pressure to hip bone (support ridge removed from the belt shank)
- Locks onto the duty belt with belt slot design, no belt tension screws needed; will not damage top of belt
- Compatible with any holster with the 3-hole pattern
- Available in 2” (50mm) or 2.25”(58mm) belt widths
Safariland 6072UBL HI-RIDE UNIVERSAL BELT LOOP Black
The 6072UBL is a hi-ride belt loop. It will not pinch or add pressure to hip bone, locks onto the duty belt with belt slot design, and is compatible with any holster with the 3-hole pattern.
- Will not pinch or add pressure to hip bone (support ridge removed from the belt shank)
- Locks onto the duty belt with belt slot design, no belt tension screws needed; will not damage top of belt
- Compatible with any holster with the 3-hole pattern
- Available in 2” (50mm) or 2.25”(58mm) belt widths
Safariland 6075UBL LOW-RIDE UNIVERSAL BELT LOOP FDE 2.25″
The 6075UBL is a low-ride belt loop. It will not pinch or add pressure to hip bone, locks onto the duty belt with belt slot design, and is compatible with any holster with the 3-hole pattern.
- Will not pinch or add pressure to hip bone (support ridge removed from the belt shank)
- Locks onto the duty belt with belt slot design, no belt tension screws needed; will not damage top of belt
- Compatible with any holster with the 3-hole pattern
- Available in 2” (50mm) or 2.25”(58mm) belt widths
Safariland 6070UBL MID-RIDE UNIVERSAL BELT LOOP FDE 2,25″
MODEL 6070UBL MID-RIDE UNIVERSAL BELT LOOP
The 6070UBL is a mid-ride belt loop. It will not pinch or add pressure to hip bone, locks onto the duty belt with belt slot design, and is compatible with any holster with the 3-hole pattern.
- Mid-ride belt loop
- Does not pinch or add pressure to hip bone
- Locks onto the duty belt with belt slot design
- Compatible with any Safariland holster with the 3-hole pattern
- Available in 2” (50mm) and 2.25” (58mm) belt widths
Safariland Molle System Adapter FDE
The small MOLLE Adapter Plate is used to attach holsters and pouches to MOLLE looped vests. Using Allen screws and the mounting holes in the plate, user can attach one holster in vertical or angled position, or two accessory pouches affixed side by side. Constructed of a sturdy polymer, it has two pieces of 1 in. webbing on each side of the plate that weave through and snap around the MOLLE loops for secure attachment of gear. Offered in Black, OD Green, Foliage Green, FDE Brown, or Coyote Brown.
- Holster can be worn vertical or angled to meet user’s requirements
- Two pieces of 1 in. webbing on each side of the plate weave through and snap around the MOLLE loops
- Snap system designed to easily secure handgun or pouch to vest
- Available in Black, Foliage Green, OD Green, FDE Brown or Coyote
SchleTek Suppressor Cleaner Evolution 500 ml
Highly effective, fast and easy to use cleaner for suppressors of all types, materials and coatings. No more laborious cleaning procedures due to self-active cleaning formula that makes short work of stubborn fouling.
Modern suppressors combine several advantages: Noise suppression, recoil reduction and precision enhancement. But as the degree of accumulated fouling increases, the performance of the suppressor drops substantially. Therefore, suppressor cleaning should not be disregarded and the suppressor be cleaned regularly. If no manufacturer´s recommendation exists, suppressors should be cleaned, at least, when heavily soiled or when they have not been in use over a longer period of time to prevent the formation of acidic condensates.
Suppressor Cleaner Evolution has been developed in collaboration with the world´s leading manufacturer of suppressors for the military and the authorities, Swiss B&T AG based in Thun. SchleTek Evolution is easy to use and rapid acting. It cleans all types of suppressors with its special self-active cleaning formula and removes even stubborn fouling. Laborious cleaning procedures are now a thing of the past.
Even suppressors which cannot be disassembled, carbon suppressors and suppressors with rows of holes or super-fine suppression maximising baffles, which are usually very difficult to clean, can be cleaned easily and effortless with SchleTek Evolution. The suppressor has to be closed on one end, and then filled with the cleaner from the opposite end. Suppressors which can be taken apart are simply put into a container filled with SchleTek Evolution. After a reaction time of only 20 to 30 minutes, for stubborn fouling up to a maximum of 120 minutes, all residue can be easily flushed out or rinsed off with warm water. Heating to approximately 50°C (122°F) additionally increases cleaning efficiency. SchleTek Evolution is also suitable for ultrasonic baths.
SchleTek Suppressor Cleaner Evolution is environmentally friendly, water soluble, and has been positively tested for compatibility of materials. Due to its special pH-neutral formula it does not harm any surfaces and is suitable for all materials and coatings, including Cerakote™.
To protect and preserve suppressors, spray SchleTek 2in1 Gun-Tuning on thread and suppressor after cleaning and fully drying.
Available in 500 ml bottle, 1 litre bottle, and 5 litre canister. Additional sizes available on request.
SchleTek 2 in 1 Gun-Tuning 200 ml
Schletek 2 in 1 Gun tuning, is a high quality PTFE and ceramic spray cleaner. applicable only on firearms airguns and knives. Hugh temperature resistance from -40 °C to +750 °C.
SchleTek 2 in 1 Gun-Tuning 100 ml
Schletek 2 in 1 Gun tuning, is a high quality PTFE and ceramic spray cleaner. applicable only on firearms airguns and knives. Hugh temperature resistance from -40 °C to +750 °C.
SchleTek Bore Cleaner 200 ml
SchleTek Bore Cleaner 200 ml
Bore Cleaner comprises of several high quality cleaning agents and complexes especialy developed to clean barrels. Bore Cleaner penetrates and removes dirt such as: Tombac, copper, zinc, gunpowder residue, lead and oil. Acid and ammonia-free.
SchleTek Gun-Tuning Sniper Grease 50g
GTS Grease has been especialy designed for applications of weapons for use in plastic-plastic or plastic-metal. It has excellent release and slip properties.
SchleTek Gun Cleaner 500 ml
SchleTek Gun Cleaner 500 ml
Schletek Gun Cleaner cleans and degreases virtually any material or dirty surface such as metal wood, plastic, rubber, neoprene, leather, varnished and sealed surfaces. Gun Cleaner cleans grease, oil, wax, blood, insects and dust. Economical and efficient Removes gunpowder residue, oils and…
Safariland Quick Locking System Kit 1 FDE
The QUICK-KIT includes the QLS 19 Locking Fork and QLS 22 or QLS 22L (Extra Locking Feature) Receiver Plate components. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The QLS (Quick Locking System) allows for quick transfer of gear between attachment points such as a belt loop, tactical leg shroud or other stable platform. The QLS fork and plate combination passes the Level I Retention™ pull test. Allows users to rearrange gear quickly and easily without the use of tools. Hardware and Allen wrench included. Available in Black, FDE Brown, Foliage Green, OD Green or Coyote Brown.
2 YEARS WARRANTY
ONLINE SUPPORT