Clawgear PMAG Legalizer Minus 20 RDS 3-Pack
€12,90
Out of stock
Description
The PMAG® Legalizer is intended to be installed into 30 round Magpul® PMAG® magazines of 2nd or 3rd generation to reduce the capacity down to 10 rounds. Installation of this high-quality product made from glass fiber reinforced polymer is simple and does not require any tools. No permanent modification of the magazine is necessary.
NOTE: The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity. Make sure to check all laws and regulations in your country to determine the legality of your magazines.
Magpul® and PMAG® are registered trademarks owned by Magpul Industries Corp. Neither Clawgear, nor TMH Trading GmbH are affiliated in any manner with or otherwise endorsed by, Magpul Industries Corp. For genuine Magpul products and parts visit www.magpul.com.
- Magazine capacity:
- 20 rds
DIMENSIONS AND WEIGHT
- Length:
- 13 cm
- Length packed:
- 23.4 cm
- Wide:
- 6 cm
- Width packed:
- 13 cm
- Height:
- 1 cm
- Height packed:
- 1.3 cm
- Weight:
- 0.054 kg
- Weight packed:
- 0.072 kg
Additional information
| Weight | 200 g |
|---|---|
| Dimensions | 10 × 5 × 10 cm |
Related products
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
Manta Defense 6″ Very Low-Profile Wire Routing Rail Guard Black
The MANTA Very-Low-Profile Rail Guard covers 6 inches of rail and creates an incredible tactile feel, while resisting the extreme heat generated during sustained or automatic fire. Guards can be cut to length for a custom fit and snap anywhere on a rail in seconds. The modular design of the Guard will interface with any Manta products, protecting any exposed rail area. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that this product is standard issue to Militaries around the world.
€12,95Add to cart
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
Manta Defense M-Lok Rail Guards Black
6 EACH FRICTION LOCK INSERTS
The Manta rail guard designed for M-Lok rails not only pushes into and fully engages into the M-Lok slot there are also friction tab inserts that expand the guards, further preventing them from pulling out of the rail. The Manta guards solve the issue of newer slim profile rails being too hot to handle. The Manta rail guards for M-Lok rails will allow you to handle the weapon even during full auto fire!
€19,95Add to cart
B Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
B Pos Bloodgroup Patch Desert
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
0 Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
0 Neg Bloodgroup Patch RAL7013
Woven patch in superior resolution and quality. Features hook backside to be mounted on loop id mounting surfaces
€2,90Add to cart
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
Manta Defense Momentary Switch Kit Black
The MANTA Momentary Switch kit allows you to install a momentary activation switch in seconds utilizing MANTA Micro Pocket technology! No more tape, glue or zip ties! Simply insert the pressure pad into the Micro Pocket and snap the panel onto you rail system! Our positive engagement design locks the switch anywhere on your rail! This kit comes with one Micro Pocket Switch Holder and two Cross Clips to manage your excess wires. The Manta Micro Pocket Switch Holder allows easy mounting of most pressure pads internally, while protecting them from heat and external hazards. The Manta Cross Clips provide a revolutionary way to route and take up extra lengths of wire in a multitude of configurations. Protect gear from snags and external hazards. All Manta products resist Extreme Heat, Chemicals and Abrasion. We are proud to say that both of these components are standard issue to the U.S.M.C. on the M27 Infantry Automatic Rifle as well as standard issue to Militaries around the world.
€37,95Add to cart
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
Manta Defense M27IAR Kit FDE Flat Dark Earth
The MANTA M27IAR kit was selected by the U.S.M.C as standard issue on the new M27 Infantry Automatic Rifle. The M27IAR KIT was designed to cover the rails of the Heckler & Koch HK416 variant that was specifically designated by the United States Marine Corps as the “M27” (IAR). The “M27” designation represents a tribute to the 2nd Battalion, 7th Marine Regiment which is the unit that devised the original concept of the Infantry Automatic Rifle. The M27IAR kit consists of 1ea. Micro Pocket Switch Holder that allows easy mounting of a pressure pad anywhere on the rail, 2ea. Cross Clips to help manage and route wires, 2ea. Low-Profile Wire Routing Rail Guards that route and manage wires within the rail guard and 1ea. Vertical Grip Sleeve for an optional pressure pad mounting location. All Manta Rail Guards and Wire Management Products provide an incredible tactile feel and will resist the extreme heat generated by sustained or automatic fire. Cover the top rail to eliminate sight picture mirage generated by the heat of the barrel. Heat transfer from the rail to your hand has become a thing of the past with MANTA Rail Guards. All MANTA products are produced from revolutionary materials that resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the components assembled in this kit are standard issue to the United States Marine Corp and Militaries around the world.
€78,95Read more
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
Manta Defense Micro Pocket Switch Holder Tan FDE
Now you can add 2.75″ of rail coverage with the Micro Pocket Switch Holder! The modular design allows you to interface panels with any of the MANTA rail guard products, allowing you to cover any exposed rail area! Cover your top rail to eliminate the mirage effect in your sights generated by the heat of the barrel! Run all wires and switches within the grip utilizing Micro Pocket Technology! Heat transfer from the rail to your hand has become a thing of the past with MANTA rail guards! All MANTA products are produced from Mil-Std materials that will resist Extreme Heat, Chemicals and Abrasion! We are proud to say that the M1020 is standard issue to the USMC as part of the M27IAR program and has been assigned National Stock Number NSN1005016071663.
€13,95Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT