Direct Action Spitfire MK II Slick Carbine Mag Flap – Multicam
€54,90
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
1 in stock
Related products
Warrior Recon Plate Carrier COYOTE
The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection.
Warrior Recon Plate Carrier COYOTE
The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection.
€172,00Select options
Warrior small/medium Torch MULTICAM
The Warrior Small Torch Pouch takes up 1 horizontal row of MOLLE on any compatible plate carrier, chest rig, belt or bag. Featuring 500D Cordura Crye
Warrior small/medium Torch MULTICAM
The Warrior Small Torch Pouch takes up 1 horizontal row of MOLLE on any compatible plate carrier, chest rig, belt or bag. Featuring 500D Cordura Crye
€24,00Add to cart
Warrior DCS Plate Carrier Base Multicam
The DCS (Dynamic Combat System) is a lightweight armour carrier with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches, the DCS is also capable of holding large ballistic plates 10″ x 12″ front and back and 6″ x 8″ side plates.
The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort.
The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).
Warrior DCS Plate Carrier Base Multicam
The DCS (Dynamic Combat System) is a lightweight armour carrier with removable sides. Can hold Nexus Soft Armour Front and Back and in adjustable side pouches, the DCS is also capable of holding large ballistic plates 10″ x 12″ front and back and 6″ x 8″ side plates.
The DCS is fully adjustable for height and width, comes with 3D Spacer mesh lining for cooling and comfort.
The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).
€164,00Select options
Warrior LPC Low Profile Carrier V2 Ladder Sides – MultiCam
The Low Profile Carrier V2 comes with Ladder Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Low profile
Lightweight
Warrior LPC Low Profile Carrier V2 Ladder Sides – MultiCam
The Low Profile Carrier V2 comes with Ladder Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Low profile
Lightweight
€240,00Read more
WARRIOR SINGLE 7.62 X 51MM OPEN SHORT MAG POUCH MULTICAM
Elite Ops 7.62 x 51 Open Mag Pouch with Bungee retention quick release. Holds 1 x SR25, G3 or M14 Mag. Featuring 500D
WARRIOR SINGLE 7.62 X 51MM OPEN SHORT MAG POUCH MULTICAM
Elite Ops 7.62 x 51 Open Mag Pouch with Bungee retention quick release. Holds 1 x SR25, G3 or M14 Mag. Featuring 500D
€19,90Add to cart
Warrior Low Profile Carrier V2 Multicam Size L
The Low Profile Carrier V2 comes with ladder Side Cummerbunds.
The Patent Pending Warrior LPC Low Profile Carrier represents a new generation of carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
Features:
- 500D Nylon
- Thermo Pads for Cooling & Comfort
- Compatible with the RPC panel’s
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hyperlon shoulders
- Low profile
- Lightweight
Warrior Low Profile Carrier V2 Multicam Size L
The Low Profile Carrier V2 comes with ladder Side Cummerbunds.
The Patent Pending Warrior LPC Low Profile Carrier represents a new generation of carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
Features:
- 500D Nylon
- Thermo Pads for Cooling & Comfort
- Compatible with the RPC panel’s
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hyperlon shoulders
- Low profile
- Lightweight
€240,00Add to cart
Warrior single Quick Mag for 9MM Pistol MULTICAM
Warrior’s Single Quick Mag is a versatile multi-purpose magazine pouch which holds a variety of 9mm magazines. Size adjustment is by way
Warrior single Quick Mag for 9MM Pistol MULTICAM
Warrior’s Single Quick Mag is a versatile multi-purpose magazine pouch which holds a variety of 9mm magazines. Size adjustment is by way
€19,50Read more
Direct Action Spitfire MK II Slick Carbine Mag Flap – Adaptive Green
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
Direct Action Spitfire MK II Slick Carbine Mag Flap – Adaptive Green
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
€51,90Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT
Reviews
There are no reviews yet.