Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
Surefire SR07-D-IT WEAPONLIGHT SWITCH
Dual switch — operates WeaponLight and ATPIAL or DBAL laser device Pressure pad switches provide separate or simultaneous activation Snap-clamp allows easy
Surefire UE-SR07 SCOUT LIGHT REMOTE SWITCH Tan
Plug-in SR07 7” remote switch with integrated momentary-on pressure pad and click on/off switch in a MIL-STD-1913 compatible, over molded switch housing
Surefire UE-SR07 SCOUT LIGHT REMOTE SWITCH Black
Plug-in SR07 7” remote switch with integrated momentary-on pressure pad and click on/off switch in a MIL-STD-1913 compatible, over molded switch housing
Surefire SR07 WEAPONLIGHT SWITCH
Surefire SR07 WEAPONLIGHT SWITCH
Reliable remote activation for any SureFire WeaponLight with a switch socket Includes momentary-on pressure pad and constant-on push-button switch Snap-on clamp allows
SAFARILAND 7302 – DOUBLE MAGAZINE POUCH BLK SZ2 VELCRO
7302 – DOUBLE MAGAZINE POUCH
The Model 7302 AccuMold® Double Magazine Pouch is an AccuMold® trilaminate construction with ballistic weave exterior and Coptex™ lining. Features vertical or horizontal carry which offers versatility on the belt and a hook and loop or hidden snap closure. The pouch cavities expand both front and rear for a sleek, trim look. Injection molded belt loop fits 2.25″ (58mm) width belts.
- Injection-molded belt loop for horizontal or vertical carry
- Hook and loop or hidden snap closure
- Available with MOLLE straps
SAFARILAND 7303 – SINGLE MAGAZINE POUCH BLK SZ2 HOOK-LOOP
7303 – SINGLE MAGAZINE POUCH
The Model 7303 AccuMold® Single Magazine/Knife Pouch features vertical carry with hook and loop or hidden snap closure to secure magazine. It is custom molded and contoured; pouch cavity expands both front and rear for a trim look. Available in dual belt loop design to conveniently fits both 2 in. (50 mm) and 2.25 in. (58 mm) duty belts.
- AccuMold® trilaminate construction with ballistic weave exterior and Coptex™ lining
- Pouch cavity expands both front and rear for sleek, trim look
- Dual web belt loop design accommodates both 2” (50 mm) and 2.25” (58 mm) belts
- Hook and loop or hidden snap closure
- Available with MOLLE straps
SAFARILAND – 7318 ULTIMATE HINGE HANDCUFF CASE HIATTS UL-1
7318 – ULTIMATE HINGE HANDCUFF CASE
The Model 7318 AccuMold® Ultimate Hinge Handcuff case holds one pair of Safariland® Ultimate Hinge handcuffs or similar. Made from molded and contoured trilaminate construction with Coptex™ knit lining. The 7318 is available with hook and loop or hidden snap closure and conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts.
- AccuMold® trilaminate construction with ballistic weave exterior and Coptex™ lining
- Holds one pair Hiatt® 8142 cuffs
- Hook and loop or hidden snap closure
- Dual web belt loop design accommodates both 2″ (50mm) and 2.25″ (58mm) belt widths
SAFARILAND 764G – PALS 9000 STX TAC BLK GLOVE HOLDER
764G – GLOVE HOLDER
The Model 764G Glove Holder is designed to fit two pairs of latex gloves. It features a protective pouch with a snap closure. Constructed of durable SafariLaminate™ material, this holder is designed for 2.25″ (58mm) duty belts.
- Fits two pairs of latex gloves
- Protective pouch with snap closure
- Fits 2.25” (58mm) belt widths
Clawgear Smoke Grenade Pouch Core RAL7013
Clawgear’s nylon equipment is designed to increase the operator’s performance. These products are optimized to be as versatile and lightweight as possible.
Bloodtype Rubber Patch 0 Neg
Established in Berlin Jackets To Go is a great choice when you are looking for patches with unit designations, blood types or you just want to express yourself. Excellent quality, numerous types and designs mean that everyone will find something for themselves.
Bloodtype Rubber Patch 0 Pos
Established in Berlin Jackets To Go is a great choice when you are looking for patches with unit designations, blood types or you just want to express yourself. Excellent quality, numerous types and designs mean that everyone will find something for themselves.
2 YEARS WARRANTY
ONLINE SUPPORT