Direct Action SPITFIRE MK II Plate Carrier® – MultiCam®
€229,00
Taking its name from a famous WWII fighter, our SPITFIRE plate carrier® is a streamlined and dynamic platform. Lightweight and non-restricting, this plate carrier is one of the lightest in its class. But at the same time it’s a durable platform, unique in its modularity – converting to a cut-away rig in just a few simple steps.
Specs:
-Proprietary laser-cut laminate, Cordura® 500D and softshell construction
-Optional accessory cutaway system
-Front flap attached directly or via chest rig buckles in variants: PALS, kangaroo type
-Configurable with no flap, wrap around style
-Interchangeable cummerbund – side armor compatible
-Back panel zipper attachment system compatible with Crye Precision AVS™ standard
-Low profile reinforced drag handle
-Radio and PALS wings available
-Spitfire® allows for quick donning, doffing and medical access thanks to Hypalon pullers. The carrier construction enables easy and secure comm wires routing through the plate bag and cummerbund.
-Chest Rig attachment system compatible with Mayflower® / Velocity Systems standard
-Front plate only configuration using the chest rig interface
Optional pads on front, back and shoulders area for improved airflow
Zippered chest admin pocket
PTT and comms wires / antenna routing attachment points
Accessory armor package for heavy configuration in development
Related products
Warrior Side ARMOUR Pouch 1 set of 2 Pouches DCS/RICAS MULTICAM
Please note : Price is for a Pair Warrior’s Side Armour Pouch holds 8 x 6 Hard Armour Plates. Attaches by means of
Warrior Side ARMOUR Pouch 1 set of 2 Pouches DCS/RICAS MULTICAM
Please note : Price is for a Pair Warrior’s Side Armour Pouch holds 8 x 6 Hard Armour Plates. Attaches by means of
€14,00Read more
Warrior DCS Releasable Plate Carrier – MultiCam
The releasable system is a lightweight armour carrier, which accepts both soft and hard armour solutions in front, rear and side integrated pockets. The carrier is covered all round with multiple rows of 1 inch matched camo MOLLE webbing which allows the attachment of a large selection of pouches in multiple mission specific set ups.
2 x side cummerbunds allow ambidextrous opening and closure, via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops, which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened.
The internal walls of the carrier have a 3/8s inch 3D Spacer mesh lining that allows heat from the body to evaporate, this coupled with its ability to allow air flow to pass through the mesh, results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator’s comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders, the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle, for extraction of casualties.
The carrier is fully releasable, should the user need to rapidly remove the carrier in an emergency situation, for example if he falls into water, or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system, featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth, rapid separation of the front, back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth.
All Threads are Type 69 Nylon Bonded construction, which are resistant to mildew, the effects of UV light and degradation form water, heat and cold.
Warrior DCS Releasable Plate Carrier – MultiCam
The releasable system is a lightweight armour carrier, which accepts both soft and hard armour solutions in front, rear and side integrated pockets. The carrier is covered all round with multiple rows of 1 inch matched camo MOLLE webbing which allows the attachment of a large selection of pouches in multiple mission specific set ups.
2 x side cummerbunds allow ambidextrous opening and closure, via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops, which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened.
The internal walls of the carrier have a 3/8s inch 3D Spacer mesh lining that allows heat from the body to evaporate, this coupled with its ability to allow air flow to pass through the mesh, results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator’s comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders, the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle, for extraction of casualties.
The carrier is fully releasable, should the user need to rapidly remove the carrier in an emergency situation, for example if he falls into water, or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system, featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth, rapid separation of the front, back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth.
All Threads are Type 69 Nylon Bonded construction, which are resistant to mildew, the effects of UV light and degradation form water, heat and cold.
€179,00Read more
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
€240,00Read more
Direct Action SPITFIRE MK II Elastic Cummerbund® – MultiCam®
With our new SPITFIRE® MK II Plate Carrier, you are no longer forced to accept what you get, but you can actually build your own perfect carrier. Therefore, we’ve decided to create various cummerbunds. One of them is the SPITFIRE MK II Elastic Cummerbund®. The cummerbund is made entirely of 100mm/4” elastic webbing divided into sections. Each section can accommodate a single carbine magazine (AR/AK/SR or even for G36). To make reholstering easier, each section is equipped with laminate pullers, that can also be used for attaching a bungie cord, providing even more security for the mags. This cummerbund is also compatible with our standard SPITFIRE® vest as well as HELLCAT® plate carrier.
Features:
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Anchor points for attaching bungie cord as additional security
Additional laminate pull tabs
Divided into sections that can accommodate AR/AK/SR/G36 magazine
Direct Action SPITFIRE MK II Elastic Cummerbund® – MultiCam®
With our new SPITFIRE® MK II Plate Carrier, you are no longer forced to accept what you get, but you can actually build your own perfect carrier. Therefore, we’ve decided to create various cummerbunds. One of them is the SPITFIRE MK II Elastic Cummerbund®. The cummerbund is made entirely of 100mm/4” elastic webbing divided into sections. Each section can accommodate a single carbine magazine (AR/AK/SR or even for G36). To make reholstering easier, each section is equipped with laminate pullers, that can also be used for attaching a bungie cord, providing even more security for the mags. This cummerbund is also compatible with our standard SPITFIRE® vest as well as HELLCAT® plate carrier.
Features:
Compatible with both SPITFIRE MK II and the classic SPITFIRE as well as HELLCAT Plate Carriers
Made of elastic webbing
Anchor points for attaching bungie cord as additional security
Additional laminate pull tabs
Divided into sections that can accommodate AR/AK/SR/G36 magazine
€99,00Select options
Direct Action Spitfire MK II Slick Carbine Mag Flap – Adaptive Green
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
Direct Action Spitfire MK II Slick Carbine Mag Flap – Adaptive Green
When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles.
FEATURES:
-Made of proprietary and elastic webbing
-Will fit three AR/AK magazines
-Can be fitted with bungie cord pull tabs
-Mounted via hook&loop slots or via included buckles
-Additional pullers for easy opening of the flap
-Compatible with both SPITFIRE MK II as well as the classic SPITFIRE and HELLCAT Plate Carriers
€49,90Add to cart
Warrior Covert Plate Carrier Black
Warrior’s Covert Plate Carrier (CPC) is a low profile slick armour carrier designed to hold 10 x 12 plates and US style
Warrior Covert Plate Carrier Black
Warrior’s Covert Plate Carrier (CPC) is a low profile slick armour carrier designed to hold 10 x 12 plates and US style
€85,00Read more
Warrior DCS Plate Carrier base COYOTE
Warrior DCS Plate Carrier base COYOTE
€158,00Select options
Warrior Low Profile Carrier V2 Multicam Size L
The Low Profile Carrier V2 comes with ladder Side Cummerbunds.
The Patent Pending Warrior LPC Low Profile Carrier represents a new generation of carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
Features:
- 500D Nylon
- Thermo Pads for Cooling & Comfort
- Compatible with the RPC panel’s
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hyperlon shoulders
- Low profile
- Lightweight
Warrior Low Profile Carrier V2 Multicam Size L
The Low Profile Carrier V2 comes with ladder Side Cummerbunds.
The Patent Pending Warrior LPC Low Profile Carrier represents a new generation of carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
Features:
- 500D Nylon
- Thermo Pads for Cooling & Comfort
- Compatible with the RPC panel’s
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hyperlon shoulders
- Low profile
- Lightweight
€240,00Add to cart
2 YEARS WARRANTY
ONLINE SUPPORT