Warrior Riggers Belt Coyote Tan
€32,00
Description
Overview
Warriors Elite Ops Riggers Belt is made from the highest standard Mil Spec materials.The webbing used is 4088 type V11 and has a breaking strain greater than 6000 lbs. The Metal Buckles are made from heat treated hardware with a tensile strength of 2500 lbs and finished in Dark Grey Phosphate. The Material is treated with a resin which makes the belt stiff yet plyable, this is the perfect combination, it will not dig in to your sides but is rigid enough to support a holster or drop leg without the belt twisting.
SIZES
Small 29″ to 32″
Medium 32″ to 35″
Large 35″ to 38″
XL 38″ to 41″
Webbing: US Mil Spec 4088 type 13, Resin treated. Size 1 inch 23/32 ” Breaking Strain 7000 lbs
V Ring Triangle: 1208-2 PS22020-2 Meets Spec PIA-H-7195 and PIA-H-7195- Load 2500 lbs, Forged Steel with phosphate finish.
Quick Fit Belt Buckle: 1203-2 PS22040-2 Meets Spec PIA-H-7195, ANSI Z-359.2 and CSA Z-259.12-01-Load 4000 Lbs, Forged Steel with phosphate finish.
Sewn with Multiply Nylon Bonded Mils Spec Thread
Threads
Thread quality is fundamental to the construction, durability and strength of tactical equipment.
Two factors have a negative impact on the life Span of threads
1) Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.
2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.
Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew.
Infra-Red Properties
All our Clips, Fabrics, Plastic Hardware, Threads and MultiCam/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible.
Related products
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
Warrior LPC Low Profile Carrier V1 Solid Sides – MultiCam Size L
The Low Profile Carrier V1 comes with Solid Side Cummerbunds
The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today.
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma. The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The carrier holds 10” x 12” ICW and stand alone plates front and back, and up to 6” x 8” side plates and soft armour.
Features:
500D Crye MultiCam Nylon
Thermo Pads for Cooling & Comfort
compatible with the RPC panel’s
Interchangeable Front Panels
Recommended Stand Alone Armour
Holds Hard & Soft Armour
Quick release Speed Clips
Large Upper Admin Pocket
Removable shoulder Pads
Hyperlon shoulders
Holds side plates
Low profile
Lightweight
€240,00Read more
Warrior Hydration Carrier GEN2 MULTICAM
Please note: The image is for demonstration purposes only. This is the outer carrier only, it does not include the bladder or
Warrior Hydration Carrier GEN2 MULTICAM
Please note: The image is for demonstration purposes only. This is the outer carrier only, it does not include the bladder or
€35,00Read more
WARRIOR UNIVERSAL PISTOL HOLSTER LEFT HAND COYOTE TAN
Now available for left handed operators. The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide
WARRIOR UNIVERSAL PISTOL HOLSTER LEFT HAND COYOTE TAN
Now available for left handed operators. The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide
€58,00Add to cart
WARRIOR UNIVERSAL PISTOL HOLSTER BLACK
The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide variety of large and small frame
WARRIOR UNIVERSAL PISTOL HOLSTER BLACK
The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide variety of large and small frame
€58,00Add to cart
Direct Action Speed Reload Pouch Pistol – Cordura – Coyote Brown
Just like our rifle pouch, our Pistol pouch is designed for speed reloads but with secure magazine carry at the same time. The special internal material, combined with tension-adjusting elastic cord, prevents the magazine from falling out if it gets snagged.
Specs:
-Proprietary laminate, semi-rigid construction
-Adjustable, holds most double stack pistol magazines for 9 mm /.40 /.45 as well as 4.6 mm and 5.7 mm mags
-Both PALS and direct gun belt mounting compatible
Dimensions:
-9 x 4.5 x 2.5 cm
-3.54″ x 1.77″ x 0.98″
Direct Action Speed Reload Pouch Pistol – Cordura – Coyote Brown
Just like our rifle pouch, our Pistol pouch is designed for speed reloads but with secure magazine carry at the same time. The special internal material, combined with tension-adjusting elastic cord, prevents the magazine from falling out if it gets snagged.
Specs:
-Proprietary laminate, semi-rigid construction
-Adjustable, holds most double stack pistol magazines for 9 mm /.40 /.45 as well as 4.6 mm and 5.7 mm mags
-Both PALS and direct gun belt mounting compatible
Dimensions:
-9 x 4.5 x 2.5 cm
-3.54″ x 1.77″ x 0.98″
€29,90Add to cart
Wiley X Tactical Eyewear Pouch Coyote WileyX
Tactical eyewear pouch With great protection eyewear comes a great system to carry it regarding the situation and the job that you
Wiley X Tactical Eyewear Pouch Coyote WileyX
Tactical eyewear pouch With great protection eyewear comes a great system to carry it regarding the situation and the job that you
€31,50Add to cart








